Location Code
DMCE
Street Address
2200 Via Inspirada
City
Henderson
State
NV
ZIP Code
89044
Location Name
Debra March Center of Excellen

MTT 105 - 25422 - Machine Shop I

Member for

2 years 4 months
Course Name
Machine Shop I
Course Description (Default)
Introduces basic machine shop skills that include lathe operation, lathe speeds and feeds, precision measuring techniques, layout methods, band saw and drill press operations, and exposure to the science of heat-treating of metals. Shop safety and etiquette shall be emphasized. Must take concurrently withMTT 106.
Enrollment Status
Open
Units
3.00
Course Description (No Prerequisites)
Introduces basic machine shop skills that include lathe operation, lathe speeds and feeds, precision measuring techniques, layout methods, band saw and drill press operations, and exposure to the science of heat-treating of metals. Shop safety and etiquette shall be emphasized. Must take concurrently withMTT 106.
Catalog Number
105
Section
8001
Class Type
Course ID
25422
Instructor
Don Johnson
Start Date
End Date
Start Time
05:30 pm
End Time
06:50 pm
Enrollment Total
6
Enrollment Capacity
8
Waitlist Total
0
Semester Term
2262
Session
Full Semester:

The course runs 16 weeks (also known as full-term) and begins the first week of the semester and ends the last week of the semester.

Facility ID
DMCE129
Class Days
Monday
Wednesday
Class Notes
MTT 105 and MTT 106 run concurrent. Please take both classes at the same time.
Time of Day
Night
Class Materials
Late Start
Off

MTT 101 - 29385 - Introduction to Machine Shop

Member for

2 years 4 months
Course Name
Introduction to Machine Shop
Course Description (Default)
Instructs the student in shop safety, industrial terminology, tools and machine tooling, measurement and layout. Includes laboratory exercises to begin project completion of turning, milling, and grinding applications. This course incorporates mandatory certification assessment for the National Institute of Metalworking Skills Measurement, Materials and Safety Job Planning, Benchwork, and Layout Certification.Please note: It is recommended that students complete MTT 101 in the same semester as CADD 140.
Enrollment Status
Full
Units
3.00
Course Description (No Prerequisites)
Instructs the student in shop safety, industrial terminology, tools and machine tooling, measurement and layout. Includes laboratory exercises to begin project completion of turning, milling, and grinding applications. This course incorporates mandatory certification assessment for the National Institute of Metalworking Skills Measurement, Materials and Safety Job Planning, Benchwork, and Layout Certification.Please note: It is recommended that students complete MTT 101 in the same semester as CADD 140.
Catalog Number
101
Section
8001
Class Type
Course ID
29385
Instructor
Don Johnson
Start Date
End Date
Start Time
05:30 pm
End Time
09:20 pm
Enrollment Total
8
Enrollment Capacity
8
Waitlist Total
0
Semester Term
2262
Session
Full Semester:

The course runs 16 weeks (also known as full-term) and begins the first week of the semester and ends the last week of the semester.

Facility ID
DMCE129
Class Days
Friday
Class Notes
This course can be taken concurrently with FMM 101 or if you have an OSHA 10 card and needs a Prerequisite waiver please contact department dan.flick@csn.edu
Time of Day
Night
Class Materials
Late Start
Off

MTT 140 - 29381 - Inspection Techniques

Member for

2 years 4 months
Course Name
Inspection Techniques
Course Description (Default)
Introductionto the principles of dimensional metrology. Utilizes Geometric Dimensioning and Tolerancing (GD&T) concepts and applications, common measuring instruments relating to state of the art manufacturing environments, andaccurately measure manufactured parts and fixtures for the manufacturing industry. Skills focus on micrometers, calipers, and various other measurement tools. Prerequisite(s): CADD 140
Enrollment Status
Full
Units
3.00
Course Description (No Prerequisites)
Introductionto the principles of dimensional metrology. Utilizes Geometric Dimensioning and Tolerancing (GD&T) concepts and applications, common measuring instruments relating to state of the art manufacturing environments, andaccurately measure manufactured parts and fixtures for the manufacturing industry. Skills focus on micrometers, calipers, and various other measurement tools.
Prerequisites
PR: CADD 140
Catalog Number
140
Section
8001
Class Type
Course ID
29381
Instructor
Thomas Tortomasi
Start Date
End Date
Start Time
05:30 pm
End Time
09:20 pm
Enrollment Total
8
Enrollment Capacity
8
Waitlist Total
0
Semester Term
2262
Session
Full Semester:

The course runs 16 weeks (also known as full-term) and begins the first week of the semester and ends the last week of the semester.

Facility ID
DMCE130
Class Days
Wednesday
Time of Day
Night
Late Start
Off

CADD 140 - 28274 - Technical Drafting I

Member for

2 years 4 months
Course Name
Technical Drafting I
Course Description (Default)
This course will introduce students to Print Readingfor Manufacturing situationsin compliancetoindustrial standards.
Enrollment Status
Open
Units
3.00
Course Description (No Prerequisites)
This course will introduce students to Print Readingfor Manufacturing situationsin compliancetoindustrial standards.
Catalog Number
140
Section
8001
Class Type
Course ID
28274
Instructor
Thomas Tortomasi
Start Date
End Date
Start Time
05:30 pm
End Time
09:20 pm
Enrollment Total
10
Enrollment Capacity
12
Waitlist Total
0
Semester Term
2262
Session
Full Semester:

The course runs 16 weeks (also known as full-term) and begins the first week of the semester and ends the last week of the semester.

Facility ID
DMCE130
Class Days
Tuesday
Time of Day
Night
Late Start
Off

MTT 111 - 89606 - Machine Shop Practice II

Member for

2 years 4 months
Course Name
Machine Shop Practice II
Course Description (Default)
Further develops student's manual skills by putting into practice the theories and user skills introduced MTT 110. The emphasis will be a more practical, hands-on experience through the use of vertical mill work, layout techniques, vertical and horizontal band saws, measuring instruments and some lathes. Shop safety and cleanup are always stressed. Grading: Pass/FailCo-requisite: MTT 110
Enrollment Status
Open
Units
2.00
Course Description (No Prerequisites)
Further develops student's manual skills by putting into practice the theories and user skills introduced MTT 110. The emphasis will be a more practical, hands-on experience through the use of vertical mill work, layout techniques, vertical and horizontal band saws, measuring instruments and some lathes. Shop safety and cleanup are always stressed. Grading: Pass/FailCo-requisite: MTT 110
Prerequisites
Co-requisite: MTT 110
Catalog Number
111
Section
8001
Class Type
Course ID
89606
Instructor
Don Johnson
Start Date
End Date
Start Time
07:00 pm
End Time
09:20 pm
Enrollment Total
4
Enrollment Capacity
8
Waitlist Total
0
Semester Term
2258
Session
Full Semester:

The course runs 16 weeks (also known as full-term) and begins the first week of the semester and ends the last week of the semester.

Facility ID
DMCE130
Class Days
Tuesday
Thursday
Time of Day
Night
Late Start
Off
Semester

MTT 110 - 89600 - Machine Shop II

Member for

2 years 4 months
Course Name
Machine Shop II
Course Description (Default)
Introduces basic machine shop skills in manual vertical knee mill operation, appropriate milling speeds and feeds, precision measuring techniques, layout methods, band saw and drill press operations. Shop safety and etiquette shall be emphasized.
Enrollment Status
Open
Units
3.00
Course Description (No Prerequisites)
Introduces basic machine shop skills in manual vertical knee mill operation, appropriate milling speeds and feeds, precision measuring techniques, layout methods, band saw and drill press operations. Shop safety and etiquette shall be emphasized.
Catalog Number
110
Section
8001
Class Type
Course ID
89600
Instructor
Don Johnson
Start Date
End Date
Start Time
05:30 pm
End Time
06:50 pm
Enrollment Total
4
Enrollment Capacity
8
Waitlist Total
0
Semester Term
2258
Session
Full Semester:

The course runs 16 weeks (also known as full-term) and begins the first week of the semester and ends the last week of the semester.

Facility ID
DMCE130
Class Days
Tuesday
Thursday
Time of Day
Night
Late Start
Off
Semester

MTT 106 - 89598 - Machine Shop Practice I

Member for

2 years 4 months
Course Name
Machine Shop Practice I
Course Description (Default)
Expands the student's manual skills by putting into practice the theories, and user skills introduced in MTT 105. The emphasis will be geared to a more practical, hands-on experience through the use of lathes, layout techniques, vertical and horizontal band saws, measuring instruments and some vertical mill work. Shop safety and cleanup are always stressed. Co-requisite: MTT 105
Enrollment Status
Open
Units
2.00
Course Description (No Prerequisites)
Expands the student's manual skills by putting into practice the theories, and user skills introduced in MTT 105. The emphasis will be geared to a more practical, hands-on experience through the use of lathes, layout techniques, vertical and horizontal band saws, measuring instruments and some vertical mill work. Shop safety and cleanup are always stressed. Co-requisite: MTT 105
Prerequisites
Co-requisite: MTT 105
Catalog Number
106
Section
8001
Class Type
Course ID
89598
Instructor
Daniel Flick
Start Date
End Date
Start Time
07:00 pm
End Time
09:20 pm
Enrollment Total
6
Enrollment Capacity
8
Waitlist Total
0
Semester Term
2258
Session
Full Semester:

The course runs 16 weeks (also known as full-term) and begins the first week of the semester and ends the last week of the semester.

Facility ID
DMCE129
Class Days
Monday
Wednesday
Time of Day
Night
Late Start
Off
Semester

MTT 105 - 89597 - Machine Shop I

Member for

2 years 4 months
Course Name
Machine Shop I
Course Description (Default)
Introduces basic machine shop skills that include lathe operation, lathe speeds and feeds, precision measuring techniques, layout methods, band saw and drill press operations, and exposure to the science of heat-treating of metals. Shop safety and etiquette shall be emphasized. Must take concurrently withMTT 106.
Enrollment Status
Open
Units
3.00
Course Description (No Prerequisites)
Introduces basic machine shop skills that include lathe operation, lathe speeds and feeds, precision measuring techniques, layout methods, band saw and drill press operations, and exposure to the science of heat-treating of metals. Shop safety and etiquette shall be emphasized. Must take concurrently withMTT 106.
Catalog Number
105
Section
8001
Class Type
Course ID
89597
Instructor
Daniel Flick
Start Date
End Date
Start Time
05:30 pm
End Time
06:50 pm
Enrollment Total
6
Enrollment Capacity
8
Waitlist Total
0
Semester Term
2258
Session
Full Semester:

The course runs 16 weeks (also known as full-term) and begins the first week of the semester and ends the last week of the semester.

Facility ID
DMCE129
Class Days
Monday
Wednesday
Time of Day
Night
Late Start
Off
Semester

MTT 101 - 89602 - Introduction to Machine Shop

Member for

2 years 4 months
Course Name
Introduction to Machine Shop
Course Description (Default)
Instructs the student in shop safety, industrial terminology, tools and machine tooling, measurement and layout. Includes laboratory exercises to begin project completion of turning, milling, and grinding applications. This course incorporates mandatory certification assessment for the National Institute of Metalworking Skills Measurement, Materials and Safety Job Planning, Benchwork, and Layout Certification.Please note: It is recommended that students complete MTT 101 in the same semester as CADD 140.
Enrollment Status
Open
Units
3.00
Course Description (No Prerequisites)
Instructs the student in shop safety, industrial terminology, tools and machine tooling, measurement and layout. Includes laboratory exercises to begin project completion of turning, milling, and grinding applications. This course incorporates mandatory certification assessment for the National Institute of Metalworking Skills Measurement, Materials and Safety Job Planning, Benchwork, and Layout Certification.Please note: It is recommended that students complete MTT 101 in the same semester as CADD 140.
Catalog Number
101
Section
8001
Class Type
Course ID
89602
Instructor
Don Johnson
Start Date
End Date
Start Time
05:30 pm
End Time
09:20 pm
Enrollment Total
5
Enrollment Capacity
12
Waitlist Total
0
Semester Term
2258
Session
Full Semester:

The course runs 16 weeks (also known as full-term) and begins the first week of the semester and ends the last week of the semester.

Facility ID
DMCE129
Class Days
Friday
Class Notes
If you need a prerequisite waiver for FMM 101 to take this course please call department 651-2614. You will still require the course for degree
Time of Day
Night
Late Start
Off
Semester

MTT 140 - 89607 - Inspection Techniques

Member for

2 years 4 months
Course Name
Inspection Techniques
Course Description (Default)
Introductionto the principles of dimensional metrology. Utilizes Geometric Dimensioning and Tolerancing (GD&T) concepts and applications, common measuring instruments relating to state of the art manufacturing environments, andaccurately measure manufactured parts and fixtures for the manufacturing industry. Skills focus on micrometers, calipers, and various other measurement tools. Prerequisite(s): CADD 140
Enrollment Status
Open
Units
3.00
Course Description (No Prerequisites)
Introductionto the principles of dimensional metrology. Utilizes Geometric Dimensioning and Tolerancing (GD&T) concepts and applications, common measuring instruments relating to state of the art manufacturing environments, andaccurately measure manufactured parts and fixtures for the manufacturing industry. Skills focus on micrometers, calipers, and various other measurement tools.
Prerequisites
PR: CADD 140
Catalog Number
140
Section
8001
Class Type
Course ID
89607
Instructor
Thomas Tortomasi
Start Date
End Date
Start Time
05:30 pm
End Time
09:20 pm
Enrollment Total
3
Enrollment Capacity
8
Waitlist Total
0
Semester Term
2258
Session
Full Semester:

The course runs 16 weeks (also known as full-term) and begins the first week of the semester and ends the last week of the semester.

Facility ID
DMCE130
Class Days
Wednesday
Time of Day
Night
Late Start
Off
Semester