Location Code
WHTC
Street Address
4701 W. Bonanza Road
City
Las Vegas
State
NV
ZIP Code
89107
Phone Number
Location Name
Western Center

AC 102B - 28374 - Introduction to HVAC Electrical Theory and Application

Member for

2 years 4 months
Course Name
Introduction to HVAC Electrical Theory and Application
Course Description (Default)
This course covers electrical safety, basic electrical math, elementary circuit diagram reading and drawing, and motor theory. Labs cover: assembly and wiring techniques, and the use of electrical meters.
Enrollment Status
Open
Units
5.00
Course Description (No Prerequisites)
This course covers electrical safety, basic electrical math, elementary circuit diagram reading and drawing, and motor theory. Labs cover: assembly and wiring techniques, and the use of electrical meters.
Catalog Number
102B
Section
5101
Class Type
Course ID
28374
Start Date
End Date
Start Time
05:10 pm
End Time
07:40 pm
Enrollment Total
7
Enrollment Capacity
12
Waitlist Total
0
Semester Term
2272
Session
Full Semester:

The course runs 16 weeks (also known as full-term) and begins the first week of the semester and ends the last week of the semester.

Facility ID
WHT107
Class Days
Monday
Wednesday
Time of Day
Night
Late Start
Off

AC 100B - 28373 - Technician Certification Review

Member for

2 years 4 months
Course Name
Technician Certification Review
Course Description (Default)
A lecture course to prepare students for certification exam, devoted to all aspects of EPA regulatory requirements under Section 608 of the Clean Air Act.
Enrollment Status
Open
Units
0.50
Course Description (No Prerequisites)
A lecture course to prepare students for certification exam, devoted to all aspects of EPA regulatory requirements under Section 608 of the Clean Air Act.
Catalog Number
100B
Section
5103
Class Type
Course ID
28373
Instructor
Kevin Putman
Start Date
End Date
Start Time
08:00 am
End Time
05:00 pm
Enrollment Total
5
Enrollment Capacity
6
Waitlist Total
0
Semester Term
2272
Session
Dynamic (See course dates):

The course start and end dates do not fit within one of the other sessions listed above. Please check the class listing for the dates the course runs.

Facility ID
WHT117
Class Days
Friday
Time of Day
Day
Late Start
On

AC 100B - 28371 - Technician Certification Review

Member for

2 years 4 months
Course Name
Technician Certification Review
Course Description (Default)
A lecture course to prepare students for certification exam, devoted to all aspects of EPA regulatory requirements under Section 608 of the Clean Air Act.
Enrollment Status
Open
Units
0.50
Course Description (No Prerequisites)
A lecture course to prepare students for certification exam, devoted to all aspects of EPA regulatory requirements under Section 608 of the Clean Air Act.
Catalog Number
100B
Section
5102
Class Type
Course ID
28371
Instructor
Kevin Putman
Start Date
End Date
Start Time
08:00 am
End Time
05:00 pm
Enrollment Total
3
Enrollment Capacity
12
Waitlist Total
0
Semester Term
2272
Session
Dynamic (See course dates):

The course start and end dates do not fit within one of the other sessions listed above. Please check the class listing for the dates the course runs.

Facility ID
WHT115
Class Days
Saturday
Time of Day
Day
Late Start
On

AC 100B - 28368 - Technician Certification Review

Member for

2 years 4 months
Course Name
Technician Certification Review
Course Description (Default)
A lecture course to prepare students for certification exam, devoted to all aspects of EPA regulatory requirements under Section 608 of the Clean Air Act.
Enrollment Status
Full
Units
0.50
Course Description (No Prerequisites)
A lecture course to prepare students for certification exam, devoted to all aspects of EPA regulatory requirements under Section 608 of the Clean Air Act.
Catalog Number
100B
Section
5101
Class Type
Course ID
28368
Instructor
Kevin Putman
Start Date
End Date
Start Time
08:00 am
End Time
05:00 pm
Enrollment Total
12
Enrollment Capacity
12
Waitlist Total
0
Semester Term
2272
Session
Dynamic (See course dates):

The course start and end dates do not fit within one of the other sessions listed above. Please check the class listing for the dates the course runs.

Facility ID
WHT115
Class Days
Saturday
Time of Day
Day
Late Start
On

AC 230B - 87175 - Building Automation Fundamentals

Member for

2 years 4 months
Course Name
Building Automation Fundamentals
Course Description (Default)
Basics of how building systems, such as HVAC, lighting, and security systems, can communicate information through a network of intelligent control devices. Emphasis is placed on how they work together in common automation scenarios. Topics include the operation, signal types, and functions of the sensors, actuators, and other control equipment used in automated systems in commercial buildings. Prerequisite: AC 201B.
Enrollment Status
Open
Units
5.00
Course Description (No Prerequisites)
Basics of how building systems, such as HVAC, lighting, and security systems, can communicate information through a network of intelligent control devices. Emphasis is placed on how they work together in common automation scenarios. Topics include the operation, signal types, and functions of the sensors, actuators, and other control equipment used in automated systems in commercial buildings.
Prerequisites
AC 201B.
Catalog Number
230B
Section
5101
Class Type
Course ID
87175
Instructor
Timothy Willingham
Start Date
End Date
Start Time
07:50 pm
End Time
10:20 pm
Enrollment Total
4
Enrollment Capacity
12
Waitlist Total
0
Semester Term
2268
Session
Full Semester:

The course runs 16 weeks (also known as full-term) and begins the first week of the semester and ends the last week of the semester.

Facility ID
WHT115
Class Days
Tuesday
Thursday
Time of Day
Night
Late Start
Off
Semester

AC 122B - 90279 - HVAC Installation and Commissioning Techniques

Member for

2 years 4 months
Course Name
HVAC Installation and Commissioning Techniques
Course Description (Default)
Covers basic requirements to install or replace existing HVAC equipment including structural, electrical, and plumbing needs. The proper and various techniques of duct connection to HVAC equipment is covered in detail.
Enrollment Status
Open
Units
5.00
Course Description (No Prerequisites)
Covers basic requirements to install or replace existing HVAC equipment including structural, electrical, and plumbing needs. The proper and various techniques of duct connection to HVAC equipment is covered in detail.
Catalog Number
122B
Section
5101
Class Type
Course ID
90279
Instructor
Delbert Newkirk
Start Date
End Date
Start Time
07:50 pm
End Time
10:20 pm
Enrollment Total
11
Enrollment Capacity
12
Waitlist Total
0
Semester Term
2268
Session
Full Semester:

The course runs 16 weeks (also known as full-term) and begins the first week of the semester and ends the last week of the semester.

Facility ID
WHT113
Class Days
Monday
Wednesday
Time of Day
Night
Late Start
Off
Semester

FMM 101B - 91590 - Introduction to Workplace Safety

Member for

2 years 4 months
Course Name
Introduction to Workplace Safety
Course Description (Default)
This course provides an overview of 29 CFR 1910 and 1926 as applied to the Manufacturing and Facilities Maintenance field. This course places emphasis on OSHA regulations and policies. Graded Pass/Fail.
Enrollment Status
Open
Units
1.00
Course Description (No Prerequisites)
This course provides an overview of 29 CFR 1910 and 1926 as applied to the Manufacturing and Facilities Maintenance field. This course places emphasis on OSHA regulations and policies. Graded Pass/Fail.
Catalog Number
101B
Section
5103
Class Type
Course ID
91590
Instructor
Alec Vandenbroeck
Start Date
End Date
Start Time
08:00 am
End Time
12:00 pm
Enrollment Total
4
Enrollment Capacity
12
Waitlist Total
0
Semester Term
2268
Session
Dynamic (See course dates):

The course start and end dates do not fit within one of the other sessions listed above. Please check the class listing for the dates the course runs.

Facility ID
WHT111
Class Days
Friday
Time of Day
Day
Late Start
On
Semester

FMM 101B - 85311 - Introduction to Workplace Safety

Member for

2 years 4 months
Course Name
Introduction to Workplace Safety
Course Description (Default)
This course provides an overview of 29 CFR 1910 and 1926 as applied to the Manufacturing and Facilities Maintenance field. This course places emphasis on OSHA regulations and policies. Graded Pass/Fail.
Enrollment Status
Full
Units
1.00
Course Description (No Prerequisites)
This course provides an overview of 29 CFR 1910 and 1926 as applied to the Manufacturing and Facilities Maintenance field. This course places emphasis on OSHA regulations and policies. Graded Pass/Fail.
Catalog Number
101B
Section
5101
Class Type
Course ID
85311
Instructor
Alec Vandenbroeck
Start Date
End Date
Start Time
05:00 pm
End Time
09:00 pm
Enrollment Total
12
Enrollment Capacity
12
Waitlist Total
0
Semester Term
2268
Session
Four Week First Session:

The course runs 4 weeks with the beginning of the course usually occurring during the first week of the full-term.

Facility ID
WHT111
Class Days
Friday
Class Notes
Important Information for Students with Existing OSHA-10 CardsIf you have already completed an OSHA-10 or 30 outreach training at another institution, you may not be required to retake the course. Instead, you can fill out the NTE (Non-Traditional Education Credit) form along with proof of issued card to receive credit. Please contact the department for assistance.
Time of Day
Night
Late Start
Off
Semester

AC 220B - 87174 - Chiller Operations and Maintenance

Member for

2 years 4 months
Course Name
Chiller Operations and Maintenance
Course Description (Default)
This course prepares students for all necessary operations and prevention maintenance procedures for employment in central plant operations for high and low pressure chillers. Subjects to include: operation, safety, controls, pumps, maintenance, purge units and cooling towers. Prerequisite: AC 110B.
Enrollment Status
Open
Units
5.00
Course Description (No Prerequisites)
This course prepares students for all necessary operations and prevention maintenance procedures for employment in central plant operations for high and low pressure chillers. Subjects to include: operation, safety, controls, pumps, maintenance, purge units and cooling towers.
Prerequisites
AC 110B
Catalog Number
220B
Section
5101
Class Type
Course ID
87174
Instructor
Paul Hall
Start Date
End Date
Start Time
05:10 pm
End Time
07:40 pm
Enrollment Total
8
Enrollment Capacity
12
Waitlist Total
0
Semester Term
2268
Session
Full Semester:

The course runs 16 weeks (also known as full-term) and begins the first week of the semester and ends the last week of the semester.

Facility ID
WHT111
Class Days
Tuesday
Thursday
Time of Day
Night
Late Start
Off
Semester

ET 111 - 85274 - Mathematics for Electronics Applications

Member for

2 years 4 months
Course Name
Mathematics for Electronics Applications
Course Description (Default)
An electronics algebra/trigonometry course which includes signed numbers, laws of exponents, proportions, logarithms, trigonometric functions, polar and rectangular conversions. A working knowledge of pre-algebra is strongly suggested; a satisfactory ACT/SAT/Placement Test score and/or completion of a rigorous secondary school algebra course are indicators. MATH 093 with a grade of C or better or MATH 116 with a grade of C or better; or a satisfactory ACT/SAT/Placement Test score in MATH 95 or above; or Program approval.
Enrollment Status
Open
Units
3.00
Course Description (No Prerequisites)
An electronics algebra/trigonometry course which includes signed numbers, laws of exponents, proportions, logarithms, trigonometric functions, polar and rectangular conversions. A working knowledge of pre-algebra is strongly suggested; a satisfactory ACT/SAT/Placement Test score and/or completion of a rigorous secondary school algebra course are indicators. MATH 093 with a grade of C or better or MATH 116 with a grade of C or better; or a satisfactory ACT/SAT/Placement Test score in MATH 95 or above; or Program approval.
Prerequisites
MATH 116 with a grade of C or better; or a satisfactory ACT/SAT/Placement Test score in MATH 95 or above; or Program approval
Catalog Number
111
Section
5101
Class Type
Course ID
85274
Instructor
Joseph Miller
Start Date
End Date
Start Time
11:50 am
End Time
01:40 pm
Enrollment Total
5
Enrollment Capacity
10
Waitlist Total
0
Semester Term
2268
Session
Full Semester:

The course runs 16 weeks (also known as full-term) and begins the first week of the semester and ends the last week of the semester.

Facility ID
WHT117
Class Days
Tuesday
Thursday
Class Notes
This course is subject to lab fee
Time of Day
Day
Late Start
Off
Semester