Semester Name
Fall 2025
Semester Term Code
2258

CIT 129 - 86858 - Introduction to Programming

Member for

2 years 4 months
Course Name
Introduction to Programming
Course Description (Default)
This course introduces the student to problem-solving and algorithm development using a modern programming language. Students should have basic computer skills. Prerequisite: ET 111B or MATH 116 or above (except for MATH 122 and MATH 123) with a grade of C or higher, or Instructor approval.
Enrollment Status
Open
Units
3.00
Course Description (No Prerequisites)
This course introduces the student to problem-solving and algorithm development using a modern programming language. Students should have basic computer skills.
Prerequisites
ET 111B or MATH 116 or above (except for MATH 122 and MATH 123) with a grade of C or higher, or Instructor approval.
Catalog Number
129
Section
3201
Class Type
Course ID
86858
Instructor
James King
Start Date
End Date
Start Time
06:00 pm
End Time
08:50 pm
Enrollment Total
16
Enrollment Capacity
17
Waitlist Total
0
Semester Term
2258
Session
Full Semester:

The course runs 16 weeks (also known as full-term) and begins the first week of the semester and ends the last week of the semester.

Facility ID
WCC132
Class Days
Thursday
Class Notes
You have selected a hybrid course, meaning part of the course is held online and part of the course is held on-campus. CSN uses a program called Canvas for online and the online portion of courses. To find Canvas, go to https://www.csn.edu/gocsnlogin, log in using your student credentials, and click on the Canvas square. You may also need a computer with a webcam to take exams in Canvas.Students must follow all active CSN public health directives while enrolled in this class. Properly worn face coverings are optional for all faculty and students in the classroom. CSN public health directives are found at https://at.csn.edu/covid-19.
Time of Day
Night
Late Start
Off
Semester

CIT 129 - 86857 - Introduction to Programming

Member for

2 years 4 months
Course Name
Introduction to Programming
Course Description (Default)
This course introduces the student to problem-solving and algorithm development using a modern programming language. Students should have basic computer skills. Prerequisite: ET 111B or MATH 116 or above (except for MATH 122 and MATH 123) with a grade of C or higher, or Instructor approval.
Enrollment Status
Open
Units
3.00
Course Description (No Prerequisites)
This course introduces the student to problem-solving and algorithm development using a modern programming language. Students should have basic computer skills.
Prerequisites
ET 111B or MATH 116 or above (except for MATH 122 and MATH 123) with a grade of C or higher, or Instructor approval.
Catalog Number
129
Section
2203
Class Type
Course ID
86857
Instructor
Nikko Vittorio Luna
Start Date
End Date
Start Time
02:00 pm
End Time
04:50 pm
Enrollment Total
17
Enrollment Capacity
18
Waitlist Total
0
Semester Term
2258
Session
Full Semester:

The course runs 16 weeks (also known as full-term) and begins the first week of the semester and ends the last week of the semester.

Facility ID
NLVC2658
Class Days
Tuesday
Class Notes
You have selected a hybrid course, meaning part of the course is held online and part of the course is held on-campus. CSN uses a program called Canvas for online and the online portion of courses. To find Canvas, go to https://www.csn.edu/gocsnlogin, log in using your student credentials, and click on the Canvas square. You may also need a computer with a webcam to take exams in Canvas.Students must follow all active CSN public health directives while enrolled in this class. Properly worn face coverings are optional for all faculty and students in the classroom. CSN public health directives are found at https://at.csn.edu/covid-19.
Time of Day
Day
Late Start
Off
Semester

CIT 129 - 88817 - Introduction to Programming

Member for

2 years 4 months
Course Name
Introduction to Programming
Course Description (Default)
This course introduces the student to problem-solving and algorithm development using a modern programming language. Students should have basic computer skills. Prerequisite: ET 111B or MATH 116 or above (except for MATH 122 and MATH 123) with a grade of C or higher, or Instructor approval.
Enrollment Status
Full
Units
3.00
Course Description (No Prerequisites)
This course introduces the student to problem-solving and algorithm development using a modern programming language. Students should have basic computer skills.
Prerequisites
ET 111B or MATH 116 or above (except for MATH 122 and MATH 123) with a grade of C or higher, or Instructor approval.
Catalog Number
129
Section
2202
Class Type
Course ID
88817
Instructor
Brian Bourgon
Start Date
End Date
Start Time
06:00 pm
End Time
08:50 pm
Enrollment Total
17
Enrollment Capacity
17
Waitlist Total
0
Semester Term
2258
Session
Full Semester:

The course runs 16 weeks (also known as full-term) and begins the first week of the semester and ends the last week of the semester.

Facility ID
NLVC2658
Class Days
Tuesday
Class Notes
You have selected a hybrid course, meaning part of the course is held online and part of the course is held on-campus. CSN uses a program called Canvas for online and the online portion of courses. To find Canvas, go to https://www.csn.edu/gocsnlogin, log in using your student credentials, and click on the Canvas square. You may also need a computer with a webcam to take exams in Canvas.Students must follow all active CSN public health directives while enrolled in this class. Properly worn face coverings are optional for all faculty and students in the classroom. CSN public health directives are found at https://at.csn.edu/covid-19.
Time of Day
Night
Late Start
Off
Semester

CIT 129 - 86868 - Introduction to Programming

Member for

2 years 4 months
Course Name
Introduction to Programming
Course Description (Default)
This course introduces the student to problem-solving and algorithm development using a modern programming language. Students should have basic computer skills. Prerequisite: ET 111B or MATH 116 or above (except for MATH 122 and MATH 123) with a grade of C or higher, or Instructor approval.
Enrollment Status
Full
Units
3.00
Course Description (No Prerequisites)
This course introduces the student to problem-solving and algorithm development using a modern programming language. Students should have basic computer skills.
Prerequisites
ET 111B or MATH 116 or above (except for MATH 122 and MATH 123) with a grade of C or higher, or Instructor approval.
Catalog Number
129
Section
2201
Class Type
Course ID
86868
Instructor
Nikko Vittorio Luna
Start Date
End Date
Start Time
09:30 am
End Time
12:20 pm
Enrollment Total
17
Enrollment Capacity
17
Waitlist Total
0
Semester Term
2258
Session
Full Semester:

The course runs 16 weeks (also known as full-term) and begins the first week of the semester and ends the last week of the semester.

Facility ID
NLVC2658
Class Days
Monday
Class Notes
You have selected a hybrid course, meaning part of the course is held online and part of the course is held on-campus. CSN uses a program called Canvas for online and the online portion of courses. To find Canvas, go to https://www.csn.edu/gocsnlogin, log in using your student credentials, and click on the Canvas square. You may also need a computer with a webcam to take exams in Canvas.Students must follow all active CSN public health directives while enrolled in this class. Properly worn face coverings are optional for all faculty and students in the classroom. CSN public health directives are found at https://at.csn.edu/covid-19.
Time of Day
Day
Late Start
Off
Semester

CIT 129 - 86867 - Introduction to Programming

Member for

2 years 4 months
Course Name
Introduction to Programming
Course Description (Default)
This course introduces the student to problem-solving and algorithm development using a modern programming language. Students should have basic computer skills. Prerequisite: ET 111B or MATH 116 or above (except for MATH 122 and MATH 123) with a grade of C or higher, or Instructor approval.
Enrollment Status
Full
Units
3.00
Course Description (No Prerequisites)
This course introduces the student to problem-solving and algorithm development using a modern programming language. Students should have basic computer skills.
Prerequisites
ET 111B or MATH 116 or above (except for MATH 122 and MATH 123) with a grade of C or higher, or Instructor approval.
Catalog Number
129
Section
1201
Class Type
Course ID
86867
Instructor
Samuel Bachert
Start Date
End Date
Start Time
02:00 pm
End Time
04:50 pm
Enrollment Total
17
Enrollment Capacity
17
Waitlist Total
0
Semester Term
2258
Session
Full Semester:

The course runs 16 weeks (also known as full-term) and begins the first week of the semester and ends the last week of the semester.

Facility ID
WEB-REMOTE
Class Days
Monday
Class Notes
This section will be taught remotely using teleconference technology. Students will be off-campus and use the web to meet face-to-face with the instructor and classmates during the day and time listed for this course for the entire semester.
Time of Day
Day
Late Start
Off
Semester

CIT 129 - 86854 - Introduction to Programming

Member for

2 years 4 months
Course Name
Introduction to Programming
Course Description (Default)
This course introduces the student to problem-solving and algorithm development using a modern programming language. Students should have basic computer skills. Prerequisite: ET 111B or MATH 116 or above (except for MATH 122 and MATH 123) with a grade of C or higher, or Instructor approval.
Enrollment Status
Open
Units
3.00
Course Description (No Prerequisites)
This course introduces the student to problem-solving and algorithm development using a modern programming language. Students should have basic computer skills.
Prerequisites
ET 111B or MATH 116 or above (except for MATH 122 and MATH 123) with a grade of C or higher, or Instructor approval.
Catalog Number
129
Section
1002
Class Type
Location
Course ID
86854
Instructor
Efatsadat Taghva
Start Date
End Date
Enrollment Total
16
Enrollment Capacity
17
Waitlist Total
0
Semester Term
2258
Session
Full Semester:

The course runs 16 weeks (also known as full-term) and begins the first week of the semester and ends the last week of the semester.

Facility ID
WEB-ONLINE
Class Notes
You have selected an online course. There are no regularly in-person class meetings. To find out more about online courses and complete an orientation to online campus and online learning, go to https://www.csn.edu/online-support, then scroll down and click 'Orientation to Online Campus and Online Learning.' You should also have completed the Student Online Readiness Assessment. You can complete this assessment by going to https://www.csn.edu/gocsnlogin, log in using your student credentials, and click on the MyCoyoteSuccess square.CSN uses a program called Canvas for online courses. To find Canvas, go to https://www.csn.edu/gocsnlogin, log in using your student credentials, and click on the Canvas square. You may also need a computer with a webcam to take exams in Canvas._____________________________________________________________________
Late Start
Off
Semester

CIT 129 - 86851 - Introduction to Programming

Member for

2 years 4 months
Course Name
Introduction to Programming
Course Description (Default)
This course introduces the student to problem-solving and algorithm development using a modern programming language. Students should have basic computer skills. Prerequisite: ET 111B or MATH 116 or above (except for MATH 122 and MATH 123) with a grade of C or higher, or Instructor approval.
Enrollment Status
Open
Units
3.00
Course Description (No Prerequisites)
This course introduces the student to problem-solving and algorithm development using a modern programming language. Students should have basic computer skills.
Prerequisites
ET 111B or MATH 116 or above (except for MATH 122 and MATH 123) with a grade of C or higher, or Instructor approval.
Catalog Number
129
Section
1001
Class Type
Location
Course ID
86851
Instructor
Efatsadat Taghva
Start Date
End Date
Enrollment Total
16
Enrollment Capacity
17
Waitlist Total
0
Semester Term
2258
Session
Full Semester:

The course runs 16 weeks (also known as full-term) and begins the first week of the semester and ends the last week of the semester.

Facility ID
WEB-ONLINE
Class Notes
You have selected an online course. There are no regularly in-person class meetings. To find out more about online courses and complete an orientation to online campus and online learning, go to https://www.csn.edu/online-support, then scroll down and click 'Orientation to Online Campus and Online Learning.' You should also have completed the Student Online Readiness Assessment. You can complete this assessment by going to https://www.csn.edu/gocsnlogin, log in using your student credentials, and click on the MyCoyoteSuccess square.CSN uses a program called Canvas for online courses. To find Canvas, go to https://www.csn.edu/gocsnlogin, log in using your student credentials, and click on the Canvas square. You may also need a computer with a webcam to take exams in Canvas._____________________________________________________________________
Late Start
Off
Semester

MTT 230 - 89608 - Computer Numerical Control I

Member for

2 years 4 months
Course Name
Computer Numerical Control I
Course Description (Default)
This course introduces basic lathe operations. Topics and applications cover manual and computer numerical control (CNC) lathe turning practices, tooling, machining practices, G & M codes and applied mathematics. Overview the axis systems, absolute and incremental programming, tool offsets, controller operation, and fixture offsets. Emphasizes critical thinking and problem solving through hands-on experience and practical applications. Prerequisite: CADD 245 and MTT 140
Enrollment Status
Open
Units
4.00
Course Description (No Prerequisites)
This course introduces basic lathe operations. Topics and applications cover manual and computer numerical control (CNC) lathe turning practices, tooling, machining practices, G & M codes and applied mathematics. Overview the axis systems, absolute and incremental programming, tool offsets, controller operation, and fixture offsets. Emphasizes critical thinking and problem solving through hands-on experience and practical applications.
Prerequisites
CADD 245 and MTT 140
Catalog Number
230
Section
4001
Class Type
Location
Course ID
89608
Instructor
Charles Brinlee
Start Date
End Date
Start Time
05:30 pm
End Time
09:20 pm
Enrollment Total
2
Enrollment Capacity
8
Waitlist Total
0
Semester Term
2258
Session
Full Semester:

The course runs 16 weeks (also known as full-term) and begins the first week of the semester and ends the last week of the semester.

Facility ID
HNB108
Class Days
Thursday
Time of Day
Night
Late Start
Off
Semester

MTT 140 - 89607 - Inspection Techniques

Member for

2 years 4 months
Course Name
Inspection Techniques
Course Description (Default)
Introductionto the principles of dimensional metrology. Utilizes Geometric Dimensioning and Tolerancing (GD&T) concepts and applications, common measuring instruments relating to state of the art manufacturing environments, andaccurately measure manufactured parts and fixtures for the manufacturing industry. Skills focus on micrometers, calipers, and various other measurement tools. Prerequisite(s): CADD 140
Enrollment Status
Open
Units
3.00
Course Description (No Prerequisites)
Introductionto the principles of dimensional metrology. Utilizes Geometric Dimensioning and Tolerancing (GD&T) concepts and applications, common measuring instruments relating to state of the art manufacturing environments, andaccurately measure manufactured parts and fixtures for the manufacturing industry. Skills focus on micrometers, calipers, and various other measurement tools.
Prerequisites
PR: CADD 140
Catalog Number
140
Section
8001
Class Type
Course ID
89607
Instructor
Thomas Tortomasi
Start Date
End Date
Start Time
05:30 pm
End Time
09:20 pm
Enrollment Total
3
Enrollment Capacity
8
Waitlist Total
0
Semester Term
2258
Session
Full Semester:

The course runs 16 weeks (also known as full-term) and begins the first week of the semester and ends the last week of the semester.

Facility ID
DMCE130
Class Days
Wednesday
Time of Day
Night
Late Start
Off
Semester

PEX 220 - 87082 - Advanced Cross Country

Member for

2 years 4 months
Course Name
Advanced Cross Country
Course Description (Default)
This course is designed to teach and develop advanced skills required to compete in intercollegiate cross country. Prerequisite: Instructor approval
Enrollment Status
Open
Units
1.00
Course Description (No Prerequisites)
This course is designed to teach and develop advanced skills required to compete in intercollegiate cross country.
Catalog Number
220
Section
8001
Class Type
Course ID
87082
Instructor
Bryan Astudillo
Start Date
End Date
Enrollment Total
10
Enrollment Capacity
20
Waitlist Total
0
Semester Term
2258
Session
Full Semester:

The course runs 16 weeks (also known as full-term) and begins the first week of the semester and ends the last week of the semester.

Facility ID
OFF-CAMPUS
Class Notes
Cross Country
Late Start
Off
Semester