Semester Name
Spring 2026
Semester Term Code
2262

MUSE 221 - 31315 - Symphony Orchestra II

Member for

2 years 4 months
Course Name
Symphony Orchestra II
Course Description (Default)
This course is intended for orchestral conductors to develop a broad based knowledge of performance practices within orchestral literature from the Renaissance to the Present. In addition to course participation as an instrumentalist, students will participate in the teaching, rehearsing and conducting of specific pieces in order to develop rehearsal techniques relating to individual styles within the standard orchestral literature.Pre-requisite: MUSE 121 or Instructor Approval
Enrollment Status
Open
Units
1.00
Course Description (No Prerequisites)
This course is intended for orchestral conductors to develop a broad based knowledge of performance practices within orchestral literature from the Renaissance to the Present. In addition to course participation as an instrumentalist, students will participate in the teaching, rehearsing and conducting of specific pieces in order to develop rehearsal techniques relating to individual styles within the standard orchestral literature.Pre-requisite: MUSE 121 or Instructor Approval
Prerequisites
MUSE 121 or Instructor Approval
Catalog Number
221
Section
2002
Class Type
Course ID
31315
Instructor
Lindsey O'connor
Start Date
End Date
Start Time
07:30 pm
End Time
10:20 pm
Enrollment Total
1
Enrollment Capacity
15
Waitlist Total
0
Semester Term
2262
Session
Full Semester:

The course runs 16 weeks (also known as full-term) and begins the first week of the semester and ends the last week of the semester.

Facility ID
NLVH127
Class Days
Tuesday
Class Notes
You have selected an in-person class that meets on a campus at a regularly scheduled time as noted in the class schedule. Students must follow all active CSN public health directives while enrolled in this class. Properly worn face coverings are optional for all faculty and students in the classroom. This class may move fully online should the need arise due to the COVID-19 pandemic or another emergency situation. CSN public health directives are found at https://at.csn.edu/covid-19. CSN uses a program called Canvas for online and the online portion of courses. To find Canvas, go to https://www.csn.edu/gocsnlogin, log in using your student credentials, and click on the Canvas square.
Time of Day
Night
Late Start
Off

MUSE 221 - 24086 - Symphony Orchestra II

Member for

2 years 4 months
Course Name
Symphony Orchestra II
Course Description (Default)
This course is intended for orchestral conductors to develop a broad based knowledge of performance practices within orchestral literature from the Renaissance to the Present. In addition to course participation as an instrumentalist, students will participate in the teaching, rehearsing and conducting of specific pieces in order to develop rehearsal techniques relating to individual styles within the standard orchestral literature.Pre-requisite: MUSE 121 or Instructor Approval
Enrollment Status
Open
Units
1.00
Course Description (No Prerequisites)
This course is intended for orchestral conductors to develop a broad based knowledge of performance practices within orchestral literature from the Renaissance to the Present. In addition to course participation as an instrumentalist, students will participate in the teaching, rehearsing and conducting of specific pieces in order to develop rehearsal techniques relating to individual styles within the standard orchestral literature.Pre-requisite: MUSE 121 or Instructor Approval
Prerequisites
MUSE 121 or Instructor Approval
Catalog Number
221
Section
2001
Class Type
Course ID
24086
Instructor
Tyler Gordon
Start Date
End Date
Start Time
03:30 pm
End Time
06:20 pm
Enrollment Total
0
Enrollment Capacity
30
Waitlist Total
0
Semester Term
2262
Session
Full Semester:

The course runs 16 weeks (also known as full-term) and begins the first week of the semester and ends the last week of the semester.

Facility ID
NLVH127
Class Days
Monday
Class Notes
You have selected an in-person class that meets on a campus at a regularly scheduled time as noted in the class schedule. Students must follow all active CSN public health directives while enrolled in this class. Properly worn face coverings are optional for all faculty and students in the classroom. This class may move fully online should the need arise due to the COVID-19 pandemic or another emergency situation. CSN public health directives are found at https://at.csn.edu/covid-19. CSN uses a program called Canvas for online and the online portion of courses. To find Canvas, go to https://www.csn.edu/gocsnlogin, log in using your student credentials, and click on the Canvas square.
Time of Day
Day
Late Start
Off

GLO 240 - 28171 - International Development

Member for

2 years 4 months
Course Name
International Development
Course Description (Default)
This is an introduction to International Development. With a multidisciplinary approach, students will gain a foundational understanding of international development. Students will consider the meaning(s) of development, theoretical approaches to development, the roles of relevant actors and institutions, as well as a variety of issues and problems faced by countries and their peoples. Political, economic, historical cultural and environmental perspectives are valued. Students will examine issues of inequality and poverty. Students will attempt to form an understanding of challenges faced by differing countries and regions of the world. Globalization, democratization and economic liberalization will be examined. We will inquire into practical matters of development policy implementation and the impacts of those policies at the local level. Students are encouraged to explore relevant careers as we move through the course.
Enrollment Status
Open
Units
3.00
Course Description (No Prerequisites)
This is an introduction to International Development. With a multidisciplinary approach, students will gain a foundational understanding of international development. Students will consider the meaning(s) of development, theoretical approaches to development, the roles of relevant actors and institutions, as well as a variety of issues and problems faced by countries and their peoples. Political, economic, historical cultural and environmental perspectives are valued. Students will examine issues of inequality and poverty. Students will attempt to form an understanding of challenges faced by differing countries and regions of the world. Globalization, democratization and economic liberalization will be examined. We will inquire into practical matters of development policy implementation and the impacts of those policies at the local level. Students are encouraged to explore relevant careers as we move through the course.
Catalog Number
240
Section
1001
Class Type
Location
Course ID
28171
Instructor
Robert O'Meara
Start Date
End Date
Enrollment Total
13
Enrollment Capacity
30
Waitlist Total
0
Semester Term
2262
Session
Full Semester:

The course runs 16 weeks (also known as full-term) and begins the first week of the semester and ends the last week of the semester.

Facility ID
WEB-ONLINE
Class Notes
You have selected an online course. There are no regularly in-person class meetings. To find out more about online courses and complete an orientation to online campus and online learning, go to https://www.csn.edu/online-support, then scroll down and click 'Orientation to Online Campus and Online Learning.' You should also have completed the Student Online Readiness Assessment. You can complete this assessment by going to https://www.csn.edu/gocsnlogin, log in using your student credentials, and click on the MyCoyoteSuccess square.CSN uses a program called Canvas for online courses. To find Canvas, go to https://www.csn.edu/gocsnlogin, log in using your student credentials, and click on the Canvas square. You may also need a computer with a webcam to take exams in Canvas._____________________________________________________________________Instructor Note: High School/Dual Enrollment Students MUST contact the professor to discuss course requirements and policies during or prior to 10pm FRIDAY of the FIRST WEEK of the course. This is to ensure your success. Send a Canvas Message from within the course, an email (robert.omeara@CSN.edu), or call/text the professor at cell phone 413- 316- 3276. Unit scores will be entered only AFTER we actually speak. Again, this is to ensure and maximize your success. I aim to make sure that ALL High School/Dual Enrollment students may do very well during the semester.
Late Start
Off

CRJ 299 - 26063 - Special Topics

Member for

2 years 4 months
Course Name
Special Topics
Course Description (Default)
This course introduces a selected major topic or issue of importance for students in law enforcement, courts, or corrections.Prerequisite: CRJ 104.
Enrollment Status
Full
Units
1.00
Course Description (No Prerequisites)
This course introduces a selected major topic or issue of importance for students in law enforcement, courts, or corrections.
Prerequisites
CRJ 104
Catalog Number
299
Section
1001
Class Type
Location
Course ID
26063
Instructor
Colleen Harrington
Start Date
End Date
Enrollment Total
26
Enrollment Capacity
26
Waitlist Total
0
Semester Term
2262
Session
Full Semester:

The course runs 16 weeks (also known as full-term) and begins the first week of the semester and ends the last week of the semester.

Facility ID
WEB-ONLINE
Class Notes
You have selected an online course. There are no regularly in-person class meetings. To find out more about online courses and complete an orientation to online campus and online learning, go to https://www.csn.edu/online-support, then scroll down and click 'Orientation to Online Campus and Online Learning.' You should also have completed the Student Online Readiness Assessment. You can complete this assessment by going to https://www.csn.edu/gocsnlogin, log in using your student credentials, and click on the MyCoyoteSuccess square.CSN uses a program called Canvas for online courses. To find Canvas, go to https://www.csn.edu/gocsnlogin, log in using your student credentials, and click on the Canvas square. You may also need a computer with a webcam to take exams in Canvas._____________________________________________________________________
The special topic for this class will be: Serial and Mass Killers.
Late Start
Off

AV 103 - 28861 - Introduction to Unmanned Aviation Systems

Member for

2 years 4 months
Course Name
Introduction to Unmanned Aviation Systems
Course Description (Default)
A study of Unmanned Aircraft System fundamentals pertaining to drone flight operations. Preparation for the FAA Remote Pilot Certificate - Part 107 Small UAS exam. Introduction to relevant UAS topics including aircraft types, maintenance, flight characteristics, and basic photography. Eligible students (those who passed the FAA remote pilot exam) will have hands-on experience including laboratory time consisting of preflight, in-flight, and post flight exercises utilizing UAS aircraft.
Enrollment Status
Open
Subject
Units
4.00
Course Description (No Prerequisites)
A study of Unmanned Aircraft System fundamentals pertaining to drone flight operations. Preparation for the FAA Remote Pilot Certificate - Part 107 Small UAS exam. Introduction to relevant UAS topics including aircraft types, maintenance, flight characteristics, and basic photography. Eligible students (those who passed the FAA remote pilot exam) will have hands-on experience including laboratory time consisting of preflight, in-flight, and post flight exercises utilizing UAS aircraft.
Catalog Number
103
Section
4001
Class Type
Location
Course ID
28861
Instructor
Ionut Hirsovescu
Start Date
End Date
Start Time
09:00 am
End Time
12:50 pm
Enrollment Total
6
Enrollment Capacity
10
Waitlist Total
0
Semester Term
2262
Session
Full Semester:

The course runs 16 weeks (also known as full-term) and begins the first week of the semester and ends the last week of the semester.

Facility ID
HNA113
Class Days
Friday
Time of Day
Day
Late Start
Off

MTT 111 - 29380 - Machine Shop Practice II

Member for

2 years 4 months
Course Name
Machine Shop Practice II
Course Description (Default)
Further develops student's manual skills by putting into practice the theories and user skills introduced MTT 110. The emphasis will be a more practical, hands-on experience through the use of vertical mill work, layout techniques, vertical and horizontal band saws, measuring instruments and some lathes. Shop safety and cleanup are always stressed. Grading: Pass/FailCo-requisite: MTT 110
Enrollment Status
Open
Units
2.00
Course Description (No Prerequisites)
Further develops student's manual skills by putting into practice the theories and user skills introduced MTT 110. The emphasis will be a more practical, hands-on experience through the use of vertical mill work, layout techniques, vertical and horizontal band saws, measuring instruments and some lathes. Shop safety and cleanup are always stressed. Grading: Pass/FailCo-requisite: MTT 110
Prerequisites
Co-requisite: MTT 110
Catalog Number
111
Section
8001
Class Type
Course ID
29380
Instructor
Don Johnson
Start Date
End Date
Start Time
07:00 pm
End Time
09:20 pm
Enrollment Total
5
Enrollment Capacity
8
Waitlist Total
0
Semester Term
2262
Session
Full Semester:

The course runs 16 weeks (also known as full-term) and begins the first week of the semester and ends the last week of the semester.

Facility ID
DMCE133
Class Days
Tuesday
Thursday
Time of Day
Night
Class Materials
Late Start
Off

MTT 110 - 29379 - Machine Shop II

Member for

2 years 4 months
Course Name
Machine Shop II
Course Description (Default)
Introduces basic machine shop skills in manual vertical knee mill operation, appropriate milling speeds and feeds, precision measuring techniques, layout methods, band saw and drill press operations. Shop safety and etiquette shall be emphasized.
Enrollment Status
Open
Units
3.00
Course Description (No Prerequisites)
Introduces basic machine shop skills in manual vertical knee mill operation, appropriate milling speeds and feeds, precision measuring techniques, layout methods, band saw and drill press operations. Shop safety and etiquette shall be emphasized.
Catalog Number
110
Section
8001
Class Type
Course ID
29379
Instructor
Don Johnson
Start Date
End Date
Start Time
05:30 pm
End Time
06:50 pm
Enrollment Total
5
Enrollment Capacity
8
Waitlist Total
0
Semester Term
2262
Session
Full Semester:

The course runs 16 weeks (also known as full-term) and begins the first week of the semester and ends the last week of the semester.

Facility ID
DMCE129
Class Days
Tuesday
Thursday
Time of Day
Night
Class Materials
Late Start
Off

MTT 106 - 25425 - Machine Shop Practice I

Member for

2 years 4 months
Course Name
Machine Shop Practice I
Course Description (Default)
Expands the student's manual skills by putting into practice the theories, and user skills introduced in MTT 105. The emphasis will be geared to a more practical, hands-on experience through the use of lathes, layout techniques, vertical and horizontal band saws, measuring instruments and some vertical mill work. Shop safety and cleanup are always stressed. Co-requisite: MTT 105
Enrollment Status
Open
Units
2.00
Course Description (No Prerequisites)
Expands the student's manual skills by putting into practice the theories, and user skills introduced in MTT 105. The emphasis will be geared to a more practical, hands-on experience through the use of lathes, layout techniques, vertical and horizontal band saws, measuring instruments and some vertical mill work. Shop safety and cleanup are always stressed. Co-requisite: MTT 105
Prerequisites
Co-requisite: MTT 105
Catalog Number
106
Section
8001
Class Type
Course ID
25425
Instructor
Don Johnson
Start Date
End Date
Start Time
07:00 pm
End Time
09:20 pm
Enrollment Total
6
Enrollment Capacity
8
Waitlist Total
0
Semester Term
2262
Session
Full Semester:

The course runs 16 weeks (also known as full-term) and begins the first week of the semester and ends the last week of the semester.

Facility ID
DMCE133
Class Days
Monday
Wednesday
Class Notes
MTT 105 and MTT 106 run concurrent. Please take both classes at the same time.
Time of Day
Night
Class Materials
Late Start
Off

MTT 105 - 25422 - Machine Shop I

Member for

2 years 4 months
Course Name
Machine Shop I
Course Description (Default)
Introduces basic machine shop skills that include lathe operation, lathe speeds and feeds, precision measuring techniques, layout methods, band saw and drill press operations, and exposure to the science of heat-treating of metals. Shop safety and etiquette shall be emphasized. Must take concurrently withMTT 106.
Enrollment Status
Open
Units
3.00
Course Description (No Prerequisites)
Introduces basic machine shop skills that include lathe operation, lathe speeds and feeds, precision measuring techniques, layout methods, band saw and drill press operations, and exposure to the science of heat-treating of metals. Shop safety and etiquette shall be emphasized. Must take concurrently withMTT 106.
Catalog Number
105
Section
8001
Class Type
Course ID
25422
Instructor
Don Johnson
Start Date
End Date
Start Time
05:30 pm
End Time
06:50 pm
Enrollment Total
6
Enrollment Capacity
8
Waitlist Total
0
Semester Term
2262
Session
Full Semester:

The course runs 16 weeks (also known as full-term) and begins the first week of the semester and ends the last week of the semester.

Facility ID
DMCE129
Class Days
Monday
Wednesday
Class Notes
MTT 105 and MTT 106 run concurrent. Please take both classes at the same time.
Time of Day
Night
Class Materials
Late Start
Off

MTT 101 - 29385 - Introduction to Machine Shop

Member for

2 years 4 months
Course Name
Introduction to Machine Shop
Course Description (Default)
Instructs the student in shop safety, industrial terminology, tools and machine tooling, measurement and layout. Includes laboratory exercises to begin project completion of turning, milling, and grinding applications. This course incorporates mandatory certification assessment for the National Institute of Metalworking Skills Measurement, Materials and Safety Job Planning, Benchwork, and Layout Certification.Please note: It is recommended that students complete MTT 101 in the same semester as CADD 140.
Enrollment Status
Full
Units
3.00
Course Description (No Prerequisites)
Instructs the student in shop safety, industrial terminology, tools and machine tooling, measurement and layout. Includes laboratory exercises to begin project completion of turning, milling, and grinding applications. This course incorporates mandatory certification assessment for the National Institute of Metalworking Skills Measurement, Materials and Safety Job Planning, Benchwork, and Layout Certification.Please note: It is recommended that students complete MTT 101 in the same semester as CADD 140.
Catalog Number
101
Section
8001
Class Type
Course ID
29385
Instructor
Don Johnson
Start Date
End Date
Start Time
05:30 pm
End Time
09:20 pm
Enrollment Total
8
Enrollment Capacity
8
Waitlist Total
0
Semester Term
2262
Session
Full Semester:

The course runs 16 weeks (also known as full-term) and begins the first week of the semester and ends the last week of the semester.

Facility ID
DMCE129
Class Days
Friday
Class Notes
This course can be taken concurrently with FMM 101 or if you have an OSHA 10 card and needs a Prerequisite waiver please contact department dan.flick@csn.edu
Time of Day
Night
Class Materials
Late Start
Off