Subject Abbreviation
AUTO
Subject Name
Automotive

AUTO 105B - 89031 - Introduction to Automotive Service

Member for

2 years 4 months
Course Name
Introduction to Automotive Service
Course Description (Default)
An introduction to the automotive service industry. Students will learn job interview, resume writing, and workplace soft skills. Topics include automotive shop safety, pollution prevention, hazardous waste handling, and usage of internet-based service information. Students will learn basic operation of the major automotive systems, proper tool and equipment usage, and perform basic maintenance, safety inspection and service procedures, and learn about the ASE certification process.Note: This course is a prerequisite for all automotive service courses.
Enrollment Status
Full
Units
2.00
Course Description (No Prerequisites)
An introduction to the automotive service industry. Students will learn job interview, resume writing, and workplace soft skills. Topics include automotive shop safety, pollution prevention, hazardous waste handling, and usage of internet-based service information. Students will learn basic operation of the major automotive systems, proper tool and equipment usage, and perform basic maintenance, safety inspection and service procedures, and learn about the ASE certification process.Note: This course is a
Catalog Number
105B
Section
2002
Class Type
Course ID
89031
Instructor
Michael Middleton
Start Date
End Date
Start Time
01:00 pm
End Time
05:00 pm
Enrollment Total
15
Enrollment Capacity
15
Waitlist Total
0
Semester Term
2268
Session
Dynamic (See course dates):

The course start and end dates do not fit within one of the other sessions listed above. Please check the class listing for the dates the course runs.

Facility ID
NLVN140B
Class Days
Monday
Wednesday
Friday
Time of Day
Day
Late Start
Off
Semester

AUTO 105B - 89029 - Introduction to Automotive Service

Member for

2 years 4 months
Course Name
Introduction to Automotive Service
Course Description (Default)
An introduction to the automotive service industry. Students will learn job interview, resume writing, and workplace soft skills. Topics include automotive shop safety, pollution prevention, hazardous waste handling, and usage of internet-based service information. Students will learn basic operation of the major automotive systems, proper tool and equipment usage, and perform basic maintenance, safety inspection and service procedures, and learn about the ASE certification process.Note: This course is a prerequisite for all automotive service courses.
Enrollment Status
Full
Units
2.00
Course Description (No Prerequisites)
An introduction to the automotive service industry. Students will learn job interview, resume writing, and workplace soft skills. Topics include automotive shop safety, pollution prevention, hazardous waste handling, and usage of internet-based service information. Students will learn basic operation of the major automotive systems, proper tool and equipment usage, and perform basic maintenance, safety inspection and service procedures, and learn about the ASE certification process.Note: This course is a
Catalog Number
105B
Section
2001
Class Type
Course ID
89029
Instructor
Michael Middleton
Start Date
End Date
Start Time
08:00 am
End Time
12:00 pm
Enrollment Total
15
Enrollment Capacity
15
Waitlist Total
0
Semester Term
2268
Session
Dynamic (See course dates):

The course start and end dates do not fit within one of the other sessions listed above. Please check the class listing for the dates the course runs.

Facility ID
NLVB1304
Class Days
Monday
Wednesday
Friday
Time of Day
Day
Late Start
Off
Semester

AUTO 245B - 52257 - Power Train Removal and Replacement

Member for

2 years 4 months
Course Name
Power Train Removal and Replacement
Course Description (Default)
Students will complete removal and installation of major automotive components including the engine assembly, transmission/transaxle assembly, differential, and transfer case. Before and after inspections will be performed. Prerequisite(s): AUTO 117B with a grade of B- or higher; and AUTO 136B.
Enrollment Status
Full
Units
4.00
Course Description (No Prerequisites)
Students will complete removal and installation of major automotive components including the engine assembly, transmission/transaxle assembly, differential, and transfer case. Before and after inspections will be performed.
Prerequisites
Prerequisite(s): AUTO 117B with a grade of B- or higher; and AUTO 136B
Catalog Number
245B
Section
2001
Class Type
Course ID
52257
Instructor
Daniel Valles
Start Date
End Date
Start Time
06:00 pm
End Time
10:00 pm
Enrollment Total
15
Enrollment Capacity
15
Waitlist Total
0
Semester Term
2265
Session
Dynamic (See course dates):

The course start and end dates do not fit within one of the other sessions listed above. Please check the class listing for the dates the course runs.

Facility ID
NLVN141
Class Days
Monday
Tuesday
Wednesday
Thursday
Friday
Time of Day
Night
Late Start
Off

AUTO 105B - 52256 - Introduction to Automotive Service

Member for

2 years 4 months
Course Name
Introduction to Automotive Service
Course Description (Default)
An introduction to the automotive service industry. Students will learn job interview, resume writing, and workplace soft skills. Topics include automotive shop safety, pollution prevention, hazardous waste handling, and usage of internet-based service information. Students will learn basic operation of the major automotive systems, proper tool and equipment usage, and perform basic maintenance, safety inspection and service procedures, and learn about the ASE certification process.Note: This course is a prerequisite for all automotive service courses.
Enrollment Status
Open
Units
2.00
Course Description (No Prerequisites)
An introduction to the automotive service industry. Students will learn job interview, resume writing, and workplace soft skills. Topics include automotive shop safety, pollution prevention, hazardous waste handling, and usage of internet-based service information. Students will learn basic operation of the major automotive systems, proper tool and equipment usage, and perform basic maintenance, safety inspection and service procedures, and learn about the ASE certification process.Note: This course is a
Catalog Number
105B
Section
2001
Class Type
Course ID
52256
Instructor
Terrence De Waal
Start Date
End Date
Start Time
08:00 am
End Time
12:00 pm
Enrollment Total
12
Enrollment Capacity
15
Waitlist Total
0
Semester Term
2265
Session
Dynamic (See course dates):

The course start and end dates do not fit within one of the other sessions listed above. Please check the class listing for the dates the course runs.

Facility ID
NLVN140B
Class Days
Monday
Wednesday
Thursday
Time of Day
Day
Late Start
Off

AUTO 245B - 28670 - Power Train Removal and Replacement

Member for

2 years 4 months
Course Name
Power Train Removal and Replacement
Course Description (Default)
Students will complete removal and installation of major automotive components including the engine assembly, transmission/transaxle assembly, differential, and transfer case. Before and after inspections will be performed. Prerequisite(s): AUTO 117B with a grade of B- or higher; and AUTO 136B.
Enrollment Status
Open
Units
4.00
Course Description (No Prerequisites)
Students will complete removal and installation of major automotive components including the engine assembly, transmission/transaxle assembly, differential, and transfer case. Before and after inspections will be performed.
Prerequisites
Prerequisite(s): AUTO 117B with a grade of B- or higher; and AUTO 136B
Catalog Number
245B
Section
2001
Class Type
Course ID
28670
Instructor
Richard Viola
Start Date
End Date
Start Time
08:00 am
End Time
12:00 pm
Enrollment Total
12
Enrollment Capacity
15
Waitlist Total
0
Semester Term
2262
Session
Dynamic (See course dates):

The course start and end dates do not fit within one of the other sessions listed above. Please check the class listing for the dates the course runs.

Facility ID
NLVN141
Class Days
Monday
Tuesday
Wednesday
Thursday
Friday
Time of Day
Day
Late Start
On

AUTO 240B - 28681 - Nevada 1g Emission Inspection Preparation

Member for

2 years 4 months
Course Name
Nevada 1g Emission Inspection Preparation
Course Description (Default)
This course meets the initial State of Nevada training requirements for those individuals wishing to become a Nevada 1G emission inspector.
Enrollment Status
Open
Units
2.00
Course Description (No Prerequisites)
This course meets the initial State of Nevada training requirements for those individuals wishing to become a Nevada 1G emission inspector.
Catalog Number
240B
Section
2002
Class Type
Course ID
28681
Instructor
Jesse Gerlach, Jesse Gerlach
Start Date
End Date
Start Time
08:00 am
End Time
05:00 pm
Enrollment Total
2
Enrollment Capacity
15
Waitlist Total
0
Semester Term
2262
Session
Dynamic (See course dates):

The course start and end dates do not fit within one of the other sessions listed above. Please check the class listing for the dates the course runs.

Facility ID
NLVN140B
Class Days
Saturday
Time of Day
Day
Class Materials
Late Start
On

AUTO 240B - 28680 - Nevada 1g Emission Inspection Preparation

Member for

2 years 4 months
Course Name
Nevada 1g Emission Inspection Preparation
Course Description (Default)
This course meets the initial State of Nevada training requirements for those individuals wishing to become a Nevada 1G emission inspector.
Enrollment Status
Open
Units
2.00
Course Description (No Prerequisites)
This course meets the initial State of Nevada training requirements for those individuals wishing to become a Nevada 1G emission inspector.
Catalog Number
240B
Section
2001
Class Type
Course ID
28680
Instructor
Jesse Gerlach, Jesse Gerlach
Start Date
End Date
Start Time
08:00 am
End Time
05:00 pm
Enrollment Total
9
Enrollment Capacity
15
Waitlist Total
0
Semester Term
2262
Session
Dynamic (See course dates):

The course start and end dates do not fit within one of the other sessions listed above. Please check the class listing for the dates the course runs.

Facility ID
NLVN140B
Class Days
Saturday
Time of Day
Day
Class Materials
Late Start
On

AUTO 235B - 28669 - Engine Performance III/Diagnostics

Member for

2 years 4 months
Course Name
Engine Performance III/Diagnostics
Course Description (Default)
Study of advanced level diagnostic test procedures and the equipment used to analyze OBD-II emission and driveability concerns. Use of Digital Storage Oscilloscopes, current ramping, scan tool analysis and 4 and 5 gas analyzers is mastered. Prerequisite: AUTO 227B.
Enrollment Status
Open
Units
4.00
Course Description (No Prerequisites)
Study of advanced level diagnostic test procedures and the equipment used to analyze OBD-II emission and driveability concerns. Use of Digital Storage Oscilloscopes, current ramping, scan tool analysis and 4 and 5 gas analyzers is mastered.
Prerequisites
AUTO 227B
Catalog Number
235B
Section
2001
Class Type
Course ID
28669
Instructor
Jared Templin
Start Date
End Date
Start Time
08:00 am
End Time
12:00 pm
Enrollment Total
8
Enrollment Capacity
15
Waitlist Total
0
Semester Term
2262
Session
Dynamic (See course dates):

The course start and end dates do not fit within one of the other sessions listed above. Please check the class listing for the dates the course runs.

Facility ID
NLVN132
Class Days
Monday
Tuesday
Wednesday
Thursday
Friday
Time of Day
Day
Late Start
On

AUTO 227B - 28668 - Engine Performance II/Emission Control

Member for

2 years 4 months
Course Name
Engine Performance II/Emission Control
Course Description (Default)
Students will continue to use skills learned in AUTO 225B and will perform more advanced diagnostics. Emission system operation, diagnostics, and repairs will be included. Advanced scan tool usage will be emphasized.This course, along with AUTO225B, will prepare students for the ASE A8 Engine Performance certification exam. Prerequisite(s): AUTO 117B with a grade of B- or higher; and AUTO 225B.
Enrollment Status
Full
Units
4.00
Course Description (No Prerequisites)
Students will continue to use skills learned in AUTO 225B and will perform more advanced diagnostics. Emission system operation, diagnostics, and repairs will be included. Advanced scan tool usage will be emphasized.This course, along with AUTO225B, will prepare students for the ASE A8 Engine Performance certification exam.
Prerequisites
AUTO 117B with a grade of B- or higher; and AUTO 225B
Catalog Number
227B
Section
2002
Class Type
Course ID
28668
Instructor
Jesse Gerlach
Start Date
End Date
Start Time
06:00 pm
End Time
09:30 pm
Enrollment Total
15
Enrollment Capacity
15
Waitlist Total
0
Semester Term
2262
Session
Full Semester:

The course runs 16 weeks (also known as full-term) and begins the first week of the semester and ends the last week of the semester.

Facility ID
NLVN140B
Class Days
Monday
Wednesday
Time of Day
Night
Late Start
Off

AUTO 227B - 28667 - Engine Performance II/Emission Control

Member for

2 years 4 months
Course Name
Engine Performance II/Emission Control
Course Description (Default)
Students will continue to use skills learned in AUTO 225B and will perform more advanced diagnostics. Emission system operation, diagnostics, and repairs will be included. Advanced scan tool usage will be emphasized.This course, along with AUTO225B, will prepare students for the ASE A8 Engine Performance certification exam. Prerequisite(s): AUTO 117B with a grade of B- or higher; and AUTO 225B.
Enrollment Status
Open
Units
4.00
Course Description (No Prerequisites)
Students will continue to use skills learned in AUTO 225B and will perform more advanced diagnostics. Emission system operation, diagnostics, and repairs will be included. Advanced scan tool usage will be emphasized.This course, along with AUTO225B, will prepare students for the ASE A8 Engine Performance certification exam.
Prerequisites
AUTO 117B with a grade of B- or higher; and AUTO 225B
Catalog Number
227B
Section
2001
Class Type
Course ID
28667
Instructor
Jared Templin
Start Date
End Date
Start Time
08:00 am
End Time
12:00 pm
Enrollment Total
8
Enrollment Capacity
15
Waitlist Total
0
Semester Term
2262
Session
Dynamic (See course dates):

The course start and end dates do not fit within one of the other sessions listed above. Please check the class listing for the dates the course runs.

Facility ID
NLVN140B
Class Days
Monday
Tuesday
Wednesday
Thursday
Friday
Time of Day
Day
Late Start
On