Subject Abbreviation
CADD
Subject Name
Computer Aided Drafting And Design

CADD 105 - 28745 - Intermediate Computer Aided Drafting

Member for

2 years 4 months
Course Name
Intermediate Computer Aided Drafting
Course Description (Default)
Introducesstudents to the intermediate features of a CADD workstation using industry standards. Students will utilize CADD to produce two- and three-dimensional drawings in preparation for the construction and manufacturing industry.Students will be exposed to Architecture and Engineering career standards. Co-requisite: CADD 100.
Enrollment Status
Open
Units
3.00
Course Description (No Prerequisites)
Introducesstudents to the intermediate features of a CADD workstation using industry standards. Students will utilize CADD to produce two- and three-dimensional drawings in preparation for the construction and manufacturing industry.Students will be exposed to Architecture and Engineering career standards. Co-requisite: CADD 100.
Prerequisites
Co-requisite: CADD 100.
Catalog Number
105
Section
1801
Class Type
Location
Course ID
28745
Instructor
Jessica Branson
Start Date
End Date
Enrollment Total
3
Enrollment Capacity
16
Waitlist Total
0
Semester Term
2272
Session
Eight Week First Session:

The course begins the first week of the full semester and ends at the half-way point of the full semester or the first 8-weeks of the full term.

Facility ID
WEB-ONLINE
Late Start
Off

CADD 100 - 28743 - Introduction to Computer Aided Drafting

Member for

2 years 4 months
Course Name
Introduction to Computer Aided Drafting
Course Description (Default)
Student will be introduced to the basic operation of a CADD workstation using AutoCAD software in a Microsoft Windows environment to produce twodimensional drawings. Students that register for this class should have a strong knowledge of computer file management and a concept of drafting.
Enrollment Status
Open
Units
3.00
Course Description (No Prerequisites)
Student will be introduced to the basic operation of a CADD workstation using AutoCAD software in a Microsoft Windows environment to produce twodimensional drawings. Students that register for this class should have a strong knowledge of computer file management and a concept of drafting.
Catalog Number
100
Section
5202
Class Type
Course ID
28743
Instructor
Jessica Branson
Start Date
End Date
Start Time
12:30 pm
End Time
02:50 pm
Enrollment Total
3
Enrollment Capacity
14
Waitlist Total
0
Semester Term
2272
Session
Eight Week First Session:

The course begins the first week of the full semester and ends at the half-way point of the full semester or the first 8-weeks of the full term.

Facility ID
SUM108
Class Days
Tuesday
Time of Day
Day
Late Start
Off

CADD 100 - 28739 - Introduction to Computer Aided Drafting

Member for

2 years 4 months
Course Name
Introduction to Computer Aided Drafting
Course Description (Default)
Student will be introduced to the basic operation of a CADD workstation using AutoCAD software in a Microsoft Windows environment to produce twodimensional drawings. Students that register for this class should have a strong knowledge of computer file management and a concept of drafting.
Enrollment Status
Open
Units
3.00
Course Description (No Prerequisites)
Student will be introduced to the basic operation of a CADD workstation using AutoCAD software in a Microsoft Windows environment to produce twodimensional drawings. Students that register for this class should have a strong knowledge of computer file management and a concept of drafting.
Catalog Number
100
Section
5201
Class Type
Course ID
28739
Instructor
John Resly
Start Date
End Date
Start Time
06:00 pm
End Time
08:20 pm
Enrollment Total
6
Enrollment Capacity
14
Waitlist Total
0
Semester Term
2272
Session
Eight Week First Session:

The course begins the first week of the full semester and ends at the half-way point of the full semester or the first 8-weeks of the full term.

Facility ID
SUM108
Class Days
Wednesday
Time of Day
Night
Late Start
Off

CADD 100 - 28738 - Introduction to Computer Aided Drafting

Member for

2 years 4 months
Course Name
Introduction to Computer Aided Drafting
Course Description (Default)
Student will be introduced to the basic operation of a CADD workstation using AutoCAD software in a Microsoft Windows environment to produce twodimensional drawings. Students that register for this class should have a strong knowledge of computer file management and a concept of drafting.
Enrollment Status
Open
Units
3.00
Course Description (No Prerequisites)
Student will be introduced to the basic operation of a CADD workstation using AutoCAD software in a Microsoft Windows environment to produce twodimensional drawings. Students that register for this class should have a strong knowledge of computer file management and a concept of drafting.
Catalog Number
100
Section
1802
Class Type
Location
Course ID
28738
Instructor
Robert Diaz
Start Date
End Date
Enrollment Total
1
Enrollment Capacity
16
Waitlist Total
0
Semester Term
2272
Session
Eight Week Second Session:

The course begins the week of the half-way point of the full term and ends the same week as the full-term ends or the second 8-weeks of the full term.

Facility ID
WEB-ONLINE
Late Start
On

CADD 100 - 28735 - Introduction to Computer Aided Drafting

Member for

2 years 4 months
Course Name
Introduction to Computer Aided Drafting
Course Description (Default)
Student will be introduced to the basic operation of a CADD workstation using AutoCAD software in a Microsoft Windows environment to produce twodimensional drawings. Students that register for this class should have a strong knowledge of computer file management and a concept of drafting.
Enrollment Status
Open
Units
3.00
Course Description (No Prerequisites)
Student will be introduced to the basic operation of a CADD workstation using AutoCAD software in a Microsoft Windows environment to produce twodimensional drawings. Students that register for this class should have a strong knowledge of computer file management and a concept of drafting.
Catalog Number
100
Section
1801
Class Type
Location
Course ID
28735
Instructor
Robert Diaz
Start Date
End Date
Enrollment Total
15
Enrollment Capacity
16
Waitlist Total
0
Semester Term
2272
Session
Eight Week First Session:

The course begins the first week of the full semester and ends at the half-way point of the full semester or the first 8-weeks of the full term.

Facility ID
WEB-ONLINE
Late Start
Off

CADD 210 - 88025 - CADD Project

Member for

2 years 4 months
Course Name
CADD Project
Course Description (Default)
Develop project(s) andprepare students for office conditions and requirements,such as milestones, create drawings to industry standards, working with other students, as they would with future colleagues by learning Soft skills. Recommended: Print Reading, Instructorapproval, and/or 200 hours of CADD experience.
Enrollment Status
Open
Units
3.00
Course Description (No Prerequisites)
Develop project(s) andprepare students for office conditions and requirements,such as milestones, create drawings to industry standards, working with other students, as they would with future colleagues by learning Soft skills. Recommended: Print Reading, Instructorapproval, and/or 200 hours of CADD experience.
Catalog Number
210
Section
2201
Class Type
Course ID
88025
Instructor
John Resly
Start Date
End Date
Start Time
12:30 pm
End Time
03:00 pm
Enrollment Total
5
Enrollment Capacity
8
Waitlist Total
0
Semester Term
2268
Session
Full Semester:

The course runs 16 weeks (also known as full-term) and begins the first week of the semester and ends the last week of the semester.

Facility ID
NLVC2665
Class Days
Saturday
Time of Day
Day
Late Start
Off
Semester

CADD 200 - 88003 - Advanced CADD

Member for

2 years 4 months
Course Name
Advanced CADD
Course Description (Default)
This course is an introduction to 3D solid modeling using applications, equipment and CAD software. Prerequisite: CADD 100 or Instructor approval.
Enrollment Status
Open
Units
3.00
Course Description (No Prerequisites)
This course is an introduction to 3D solid modeling using applications, equipment and CAD software.
Prerequisites
CADD 100 or Instructor approval.
Catalog Number
200
Section
2201
Class Type
Course ID
88003
Instructor
Thomas Tortomasi
Start Date
End Date
Start Time
06:00 pm
End Time
08:20 pm
Enrollment Total
10
Enrollment Capacity
12
Waitlist Total
0
Semester Term
2268
Session
Full Semester:

The course runs 16 weeks (also known as full-term) and begins the first week of the semester and ends the last week of the semester.

Facility ID
NLVC2665
Class Days
Wednesday
Time of Day
Night
Late Start
Off
Semester

CADD 246B - 88028 - Solid Modeling and Parametric Design II

Member for

2 years 4 months
Course Name
Solid Modeling and Parametric Design II
Course Description (Default)
This course will provide advance training and instruction by using parametric solid modeling software to create solid model parts, assemblies and working drawings. This course will prepare students for the Solid Works certification exam. Prerequisite: CADD 245.
Enrollment Status
Open
Units
3.00
Course Description (No Prerequisites)
This course will provide advance training and instruction by using parametric solid modeling software to create solid model parts, assemblies and working drawings. This course will prepare students for the Solid Works certification exam.
Prerequisites
CADD 245.
Catalog Number
246B
Section
2201
Class Type
Course ID
88028
Instructor
Bogdan Preda
Start Date
End Date
Start Time
06:00 pm
End Time
08:20 pm
Enrollment Total
3
Enrollment Capacity
8
Waitlist Total
0
Semester Term
2268
Session
Eight Week Second Session:

The course begins the week of the half-way point of the full term and ends the same week as the full-term ends or the second 8-weeks of the full term.

Facility ID
NLVC2665
Class Days
Tuesday
Time of Day
Night
Late Start
On
Semester

CADD 140 - 87999 - Technical Drafting I

Member for

2 years 4 months
Course Name
Technical Drafting I
Course Description (Default)
This course will introduce students to Print Readingfor Manufacturing situationsin compliancetoindustrial standards.
Enrollment Status
Full
Units
3.00
Course Description (No Prerequisites)
This course will introduce students to Print Readingfor Manufacturing situationsin compliancetoindustrial standards.
Catalog Number
140
Section
1801
Class Type
Location
Course ID
87999
Instructor
Robert Diaz
Start Date
End Date
Enrollment Total
16
Enrollment Capacity
16
Waitlist Total
0
Semester Term
2268
Session
Eight Week First Session:

The course begins the first week of the full semester and ends at the half-way point of the full semester or the first 8-weeks of the full term.

Facility ID
WEB-ONLINE
Late Start
Off
Semester

CADD 245 - 88026 - Solid Modeling and Parametric Design

Member for

2 years 4 months
Course Name
Solid Modeling and Parametric Design
Course Description (Default)
Provides instruction in solid modeling using SolidWorks software to create solid model parts, assemblies, and working drawings. Prerequisite: CADD 140
Enrollment Status
Full
Units
3.00
Course Description (No Prerequisites)
Provides instruction in solid modeling using SolidWorks software to create solid model parts, assemblies, and working drawings.
Prerequisites
CADD 140
Catalog Number
245
Section
2201
Class Type
Course ID
88026
Instructor
Bogdan Preda
Start Date
End Date
Start Time
06:00 pm
End Time
08:20 pm
Enrollment Total
9
Enrollment Capacity
8
Waitlist Total
0
Semester Term
2268
Session
Eight Week First Session:

The course begins the first week of the full semester and ends at the half-way point of the full semester or the first 8-weeks of the full term.

Facility ID
NLVC2665
Class Days
Tuesday
Time of Day
Night
Late Start
Off
Semester