Location Code
WHTC
Street Address
4701 W. Bonanza Road
City
Las Vegas
State
NV
ZIP Code
89107
Phone Number
Location Name
Western Center

AC 102B - 87145 - Introduction to HVAC Electrical Theory and Application

Member for

2 years 4 months
Course Name
Introduction to HVAC Electrical Theory and Application
Course Description (Default)
This course covers electrical safety, basic electrical math, elementary circuit diagram reading and drawing, and motor theory. Labs cover: assembly and wiring techniques, and the use of electrical meters.
Enrollment Status
Full
Units
5.00
Course Description (No Prerequisites)
This course covers electrical safety, basic electrical math, elementary circuit diagram reading and drawing, and motor theory. Labs cover: assembly and wiring techniques, and the use of electrical meters.
Catalog Number
102B
Section
5105
Class Type
Course ID
87145
Instructor
Jon Davis
Start Date
End Date
Start Time
08:00 am
End Time
01:00 pm
Enrollment Total
12
Enrollment Capacity
12
Waitlist Total
0
Semester Term
2268
Session
Eight Week First Session:

The course begins the first week of the full semester and ends at the half-way point of the full semester or the first 8-weeks of the full term.

Facility ID
WHT111
Class Days
Monday
Wednesday
Time of Day
Day
Late Start
Off
Semester

AC 102B - 87595 - Introduction to HVAC Electrical Theory and Application

Member for

2 years 4 months
Course Name
Introduction to HVAC Electrical Theory and Application
Course Description (Default)
This course covers electrical safety, basic electrical math, elementary circuit diagram reading and drawing, and motor theory. Labs cover: assembly and wiring techniques, and the use of electrical meters.
Enrollment Status
Full
Units
5.00
Course Description (No Prerequisites)
This course covers electrical safety, basic electrical math, elementary circuit diagram reading and drawing, and motor theory. Labs cover: assembly and wiring techniques, and the use of electrical meters.
Catalog Number
102B
Section
5104
Class Type
Course ID
87595
Instructor
Michael Ruesch
Start Date
End Date
Start Time
05:10 pm
End Time
10:20 pm
Enrollment Total
12
Enrollment Capacity
12
Waitlist Total
0
Semester Term
2268
Session
Full Semester:

The course runs 16 weeks (also known as full-term) and begins the first week of the semester and ends the last week of the semester.

Facility ID
WHT107
Class Days
Monday
Time of Day
Night
Late Start
Off
Semester

AC 102B - 87147 - Introduction to HVAC Electrical Theory and Application

Member for

2 years 4 months
Course Name
Introduction to HVAC Electrical Theory and Application
Course Description (Default)
This course covers electrical safety, basic electrical math, elementary circuit diagram reading and drawing, and motor theory. Labs cover: assembly and wiring techniques, and the use of electrical meters.
Enrollment Status
Full
Units
5.00
Course Description (No Prerequisites)
This course covers electrical safety, basic electrical math, elementary circuit diagram reading and drawing, and motor theory. Labs cover: assembly and wiring techniques, and the use of electrical meters.
Catalog Number
102B
Section
5103
Class Type
Course ID
87147
Instructor
Jason Mitchell
Start Date
End Date
Start Time
07:50 pm
End Time
10:20 pm
Enrollment Total
12
Enrollment Capacity
12
Waitlist Total
0
Semester Term
2268
Session
Full Semester:

The course runs 16 weeks (also known as full-term) and begins the first week of the semester and ends the last week of the semester.

Facility ID
WHT115
Class Days
Monday
Wednesday
Time of Day
Night
Late Start
Off
Semester

AC 102B - 87144 - Introduction to HVAC Electrical Theory and Application

Member for

2 years 4 months
Course Name
Introduction to HVAC Electrical Theory and Application
Course Description (Default)
This course covers electrical safety, basic electrical math, elementary circuit diagram reading and drawing, and motor theory. Labs cover: assembly and wiring techniques, and the use of electrical meters.
Enrollment Status
Full
Units
5.00
Course Description (No Prerequisites)
This course covers electrical safety, basic electrical math, elementary circuit diagram reading and drawing, and motor theory. Labs cover: assembly and wiring techniques, and the use of electrical meters.
Catalog Number
102B
Section
5102
Class Type
Course ID
87144
Instructor
Donald Miller
Start Date
End Date
Start Time
08:00 am
End Time
01:00 pm
Enrollment Total
12
Enrollment Capacity
12
Waitlist Total
0
Semester Term
2268
Session
Full Semester:

The course runs 16 weeks (also known as full-term) and begins the first week of the semester and ends the last week of the semester.

Facility ID
WHT111
Class Days
Saturday
Time of Day
Day
Late Start
Off
Semester

AC 102B - 87143 - Introduction to HVAC Electrical Theory and Application

Member for

2 years 4 months
Course Name
Introduction to HVAC Electrical Theory and Application
Course Description (Default)
This course covers electrical safety, basic electrical math, elementary circuit diagram reading and drawing, and motor theory. Labs cover: assembly and wiring techniques, and the use of electrical meters.
Enrollment Status
Full
Units
5.00
Course Description (No Prerequisites)
This course covers electrical safety, basic electrical math, elementary circuit diagram reading and drawing, and motor theory. Labs cover: assembly and wiring techniques, and the use of electrical meters.
Catalog Number
102B
Section
5101
Class Type
Course ID
87143
Instructor
Raymond Muston
Start Date
End Date
Start Time
07:50 pm
End Time
10:20 pm
Enrollment Total
12
Enrollment Capacity
12
Waitlist Total
0
Semester Term
2268
Session
Full Semester:

The course runs 16 weeks (also known as full-term) and begins the first week of the semester and ends the last week of the semester.

Facility ID
WHT111
Class Days
Tuesday
Thursday
Time of Day
Night
Late Start
Off
Semester

AC 100B - 87141 - Technician Certification Review

Member for

2 years 4 months
Course Name
Technician Certification Review
Course Description (Default)
A lecture course to prepare students for certification exam, devoted to all aspects of EPA regulatory requirements under Section 608 of the Clean Air Act.
Enrollment Status
Open
Units
0.50
Course Description (No Prerequisites)
A lecture course to prepare students for certification exam, devoted to all aspects of EPA regulatory requirements under Section 608 of the Clean Air Act.
Catalog Number
100B
Section
5103
Class Type
Course ID
87141
Instructor
Jon Davis
Start Date
End Date
Start Time
08:00 am
End Time
05:00 pm
Enrollment Total
11
Enrollment Capacity
12
Waitlist Total
0
Semester Term
2268
Session
Dynamic (See course dates):

The course start and end dates do not fit within one of the other sessions listed above. Please check the class listing for the dates the course runs.

Facility ID
WHT107
Class Days
Saturday
Class Notes
Important Information for Students with Existing EPA CardsIf you have already completed an EPA Card (Technician Certification) outreach training at another institution, you may not be required to retake the course. Instead, you can fill out the NTE (Non-Traditional Education Credit) form along with the proof of issued card to receive credit. Please contact the department for assistance.
Time of Day
Day
Late Start
On
Semester

AC 100B - 87140 - Technician Certification Review

Member for

2 years 4 months
Course Name
Technician Certification Review
Course Description (Default)
A lecture course to prepare students for certification exam, devoted to all aspects of EPA regulatory requirements under Section 608 of the Clean Air Act.
Enrollment Status
Full
Units
0.50
Course Description (No Prerequisites)
A lecture course to prepare students for certification exam, devoted to all aspects of EPA regulatory requirements under Section 608 of the Clean Air Act.
Catalog Number
100B
Section
5102
Class Type
Course ID
87140
Instructor
Jon Davis
Start Date
End Date
Start Time
08:00 am
End Time
05:00 pm
Enrollment Total
14
Enrollment Capacity
12
Waitlist Total
0
Semester Term
2268
Session
Dynamic (See course dates):

The course start and end dates do not fit within one of the other sessions listed above. Please check the class listing for the dates the course runs.

Facility ID
WHT107
Class Days
Saturday
Class Notes
Important Information for Students with Existing EPA CardsIf you have already completed an EPA Card (Technician Certification) outreach training at another institution, you may not be required to retake the course. Instead, you can fill out the NTE (Non-Traditional Education Credit) form along with the proof of issued card to receive credit. Please contact the department for assistance.
Time of Day
Day
Late Start
On
Semester

AC 100B - 87135 - Technician Certification Review

Member for

2 years 4 months
Course Name
Technician Certification Review
Course Description (Default)
A lecture course to prepare students for certification exam, devoted to all aspects of EPA regulatory requirements under Section 608 of the Clean Air Act.
Enrollment Status
Full
Units
0.50
Course Description (No Prerequisites)
A lecture course to prepare students for certification exam, devoted to all aspects of EPA regulatory requirements under Section 608 of the Clean Air Act.
Catalog Number
100B
Section
5101
Class Type
Course ID
87135
Instructor
Joseph Armijo
Start Date
End Date
Start Time
11:50 am
End Time
02:40 pm
Enrollment Total
14
Enrollment Capacity
12
Waitlist Total
0
Semester Term
2268
Session
Eight Week Second Session:

The course begins the week of the half-way point of the full term and ends the same week as the full-term ends or the second 8-weeks of the full term.

Facility ID
WHT113
Class Days
Friday
Class Notes
Important Information for Students with Existing EPA CardsIf you have already completed an EPA Card (Technician Certification) outreach training at another institution, you may not be required to retake the course. Instead, you can fill out the NTE (Non-Traditional Education Credit) form along with the proof of issued card to receive credit. Please contact the department for assistance.
Time of Day
Day
Late Start
On
Semester

FMM 101B - 51658 - Introduction to Workplace Safety

Member for

2 years 4 months
Course Name
Introduction to Workplace Safety
Course Description (Default)
This course provides an overview of 29 CFR 1910 and 1926 as applied to the Manufacturing and Facilities Maintenance field. This course places emphasis on OSHA regulations and policies. Graded Pass/Fail.
Enrollment Status
Open
Units
1.00
Course Description (No Prerequisites)
This course provides an overview of 29 CFR 1910 and 1926 as applied to the Manufacturing and Facilities Maintenance field. This course places emphasis on OSHA regulations and policies. Graded Pass/Fail.
Catalog Number
101B
Section
5101
Class Type
Course ID
51658
Instructor
Alec Vandenbroeck
Start Date
End Date
Start Time
09:00 am
End Time
03:00 pm
Enrollment Total
9
Enrollment Capacity
12
Waitlist Total
0
Semester Term
2265
Session
Dynamic (See course dates):

The course start and end dates do not fit within one of the other sessions listed above. Please check the class listing for the dates the course runs.

Facility ID
WHT113
Class Days
Friday
Class Notes
Important Information for Students with Existing OSHA-10 CardsIf you have already completed an OSHA-10 or 30 outreach training at another institution, you may not be required to retake the course. Instead, you can fill out the NTE (Non-Traditional Education Credit) form along with proof of obtaining a card to receive credit. Please contact your academic advisor for assistance with the NTE form submission.
Time of Day
Day
Late Start
Off

AC 103B - 52035 - Introduction to HVAC Mechanical Theory and Application

Member for

2 years 4 months
Course Name
Introduction to HVAC Mechanical Theory and Application
Course Description (Default)
This course covers mechanical and electrical safety, basic mechanical math and physics, the refrigeration cycle, system components, enthalpy, and psychrometrics. Labs cover: recovery, evacuation, leak testing, charging, and system measurements.
Enrollment Status
Open
Units
5.00
Course Description (No Prerequisites)
This course covers mechanical and electrical safety, basic mechanical math and physics, the refrigeration cycle, system components, enthalpy, and psychrometrics. Labs cover: recovery, evacuation, leak testing, charging, and system measurements.
Catalog Number
103B
Section
5101
Class Type
Course ID
52035
Instructor
Delbert Newkirk
Start Date
End Date
Start Time
08:00 am
End Time
01:00 pm
Enrollment Total
10
Enrollment Capacity
12
Waitlist Total
0
Semester Term
2265
Session
Eight Week Session:

The course runs 8 weeks and begins the first week of the summer session.

Facility ID
WHT111
Class Days
Tuesday
Thursday
Time of Day
Day
Late Start
Off