Location Code
WHTC
Street Address
4701 W. Bonanza Road
City
Las Vegas
State
NV
ZIP Code
89107
Phone Number
Location Name
Western Center

AC 102B - 52034 - Introduction to HVAC Electrical Theory and Application

Member for

2 years 4 months
Course Name
Introduction to HVAC Electrical Theory and Application
Course Description (Default)
This course covers electrical safety, basic electrical math, elementary circuit diagram reading and drawing, and motor theory. Labs cover: assembly and wiring techniques, and the use of electrical meters.
Enrollment Status
Full
Units
5.00
Course Description (No Prerequisites)
This course covers electrical safety, basic electrical math, elementary circuit diagram reading and drawing, and motor theory. Labs cover: assembly and wiring techniques, and the use of electrical meters.
Catalog Number
102B
Section
5101
Class Type
Course ID
52034
Instructor
Jon Davis
Start Date
End Date
Start Time
08:00 am
End Time
01:00 pm
Enrollment Total
12
Enrollment Capacity
12
Waitlist Total
0
Semester Term
2265
Session
Eight Week Session:

The course runs 8 weeks and begins the first week of the summer session.

Facility ID
WHT111
Class Days
Monday
Wednesday
Time of Day
Day
Late Start
Off

AC 100B - 52033 - Technician Certification Review

Member for

2 years 4 months
Course Name
Technician Certification Review
Course Description (Default)
A lecture course to prepare students for certification exam, devoted to all aspects of EPA regulatory requirements under Section 608 of the Clean Air Act.
Enrollment Status
Open
Units
0.50
Course Description (No Prerequisites)
A lecture course to prepare students for certification exam, devoted to all aspects of EPA regulatory requirements under Section 608 of the Clean Air Act.
Catalog Number
100B
Section
5101
Class Type
Course ID
52033
Instructor
Kevin Putman
Start Date
End Date
Start Time
08:00 am
End Time
05:00 pm
Enrollment Total
11
Enrollment Capacity
12
Waitlist Total
0
Semester Term
2265
Session
Dynamic (See course dates):

The course start and end dates do not fit within one of the other sessions listed above. Please check the class listing for the dates the course runs.

Facility ID
WHT113
Class Days
Friday
Time of Day
Day
Late Start
Off

AC 231B - 25486 - Building Automation Networks and Programming

Member for

2 years 4 months
Course Name
Building Automation Networks and Programming
Course Description (Default)
Programming heating, ventilation, and air conditioning (HVAC) direct digital controllers (DDC) using line (text) programming, icon based programming, and template programming. Stresses good programming practices including complete program documentation. Introduction to control system integration practices. Common open protocols such as BACNET, Modbus and Lonworks, use of wireless protocol integration platforms such as Tridium Niagara and FieldBus, and review of whole building systems integration strategies. Prerequisite: AC 201B.
Enrollment Status
Open
Units
5.00
Course Description (No Prerequisites)
Programming heating, ventilation, and air conditioning (HVAC) direct digital controllers (DDC) using line (text) programming, icon based programming, and template programming. Stresses good programming practices including complete program documentation. Introduction to control system integration practices. Common open protocols such as BACNET, Modbus and Lonworks, use of wireless protocol integration platforms such as Tridium Niagara and FieldBus, and review of whole building systems integration strategies.
Prerequisites
AC 201B.
Catalog Number
231B
Section
5101
Class Type
Course ID
25486
Instructor
Timothy Willingham
Start Date
End Date
Start Time
07:50 pm
End Time
10:20 pm
Enrollment Total
7
Enrollment Capacity
12
Waitlist Total
0
Semester Term
2262
Session
Full Semester:

The course runs 16 weeks (also known as full-term) and begins the first week of the semester and ends the last week of the semester.

Facility ID
WHT117
Class Days
Tuesday
Thursday
Time of Day
Night
Late Start
Off

AC 122B - 28141 - HVAC Installation and Commissioning Techniques

Member for

2 years 4 months
Course Name
HVAC Installation and Commissioning Techniques
Course Description (Default)
Covers basic requirements to install or replace existing HVAC equipment including structural, electrical, and plumbing needs. The proper and various techniques of duct connection to HVAC equipment is covered in detail.
Enrollment Status
Full
Units
5.00
Course Description (No Prerequisites)
Covers basic requirements to install or replace existing HVAC equipment including structural, electrical, and plumbing needs. The proper and various techniques of duct connection to HVAC equipment is covered in detail.
Catalog Number
122B
Section
5102
Class Type
Course ID
28141
Instructor
Delbert Newkirk
Start Date
End Date
Start Time
07:50 pm
End Time
10:20 pm
Enrollment Total
12
Enrollment Capacity
12
Waitlist Total
0
Semester Term
2262
Session
Full Semester:

The course runs 16 weeks (also known as full-term) and begins the first week of the semester and ends the last week of the semester.

Facility ID
WHT111
Class Days
Monday
Wednesday
Time of Day
Night
Late Start
Off

AC 122B - 25487 - HVAC Installation and Commissioning Techniques

Member for

2 years 4 months
Course Name
HVAC Installation and Commissioning Techniques
Course Description (Default)
Covers basic requirements to install or replace existing HVAC equipment including structural, electrical, and plumbing needs. The proper and various techniques of duct connection to HVAC equipment is covered in detail.
Enrollment Status
Open
Units
5.00
Course Description (No Prerequisites)
Covers basic requirements to install or replace existing HVAC equipment including structural, electrical, and plumbing needs. The proper and various techniques of duct connection to HVAC equipment is covered in detail.
Catalog Number
122B
Section
5101
Class Type
Course ID
25487
Instructor
Kevin Putman
Start Date
End Date
Start Time
07:15 am
End Time
09:45 am
Enrollment Total
10
Enrollment Capacity
12
Waitlist Total
0
Semester Term
2262
Session
Full Semester:

The course runs 16 weeks (also known as full-term) and begins the first week of the semester and ends the last week of the semester.

Facility ID
WHT113
Class Days
Monday
Thursday
Time of Day
Day
Late Start
Off

FMM 101B - 25499 - Introduction to Workplace Safety

Member for

2 years 4 months
Course Name
Introduction to Workplace Safety
Course Description (Default)
This course provides an overview of 29 CFR 1910 and 1926 as applied to the Manufacturing and Facilities Maintenance field. This course places emphasis on OSHA regulations and policies. Graded Pass/Fail.
Enrollment Status
Full
Units
1.00
Course Description (No Prerequisites)
This course provides an overview of 29 CFR 1910 and 1926 as applied to the Manufacturing and Facilities Maintenance field. This course places emphasis on OSHA regulations and policies. Graded Pass/Fail.
Catalog Number
101B
Section
5103
Class Type
Course ID
25499
Instructor
Christie Kovello
Start Date
End Date
Start Time
05:00 pm
End Time
09:00 pm
Enrollment Total
12
Enrollment Capacity
12
Waitlist Total
0
Semester Term
2262
Session
Four Week Fourth Session:

The course runs 4 weeks with the beginning of the course usually occurring during mid-November for fall and mid-April for Spring.

Facility ID
WHT107
Class Days
Friday
Class Notes
Important Information for Students with Existing OSHA-10 CardsIf you have already completed an OSHA-10 or 30 outreach training at another institution, you may not be required to retake the course. Instead, you can fill out the NTE (Non-Traditional Education Credit) form along with proof of issued card to receive credit. Please contact the department for assistance.
Time of Day
Night
Class Materials
Late Start
On

FMM 101B - 25500 - Introduction to Workplace Safety

Member for

2 years 4 months
Course Name
Introduction to Workplace Safety
Course Description (Default)
This course provides an overview of 29 CFR 1910 and 1926 as applied to the Manufacturing and Facilities Maintenance field. This course places emphasis on OSHA regulations and policies. Graded Pass/Fail.
Enrollment Status
Full
Units
1.00
Course Description (No Prerequisites)
This course provides an overview of 29 CFR 1910 and 1926 as applied to the Manufacturing and Facilities Maintenance field. This course places emphasis on OSHA regulations and policies. Graded Pass/Fail.
Catalog Number
101B
Section
5102
Class Type
Course ID
25500
Instructor
Alec Vandenbroeck
Start Date
End Date
Start Time
05:00 pm
End Time
09:00 pm
Enrollment Total
12
Enrollment Capacity
12
Waitlist Total
0
Semester Term
2262
Session
Four Week Second Session:

The course runs 4 weeks with the beginning of the course usually occurring during late September for fall and late February for spring.

Facility ID
WHT111
Class Days
Friday
Class Notes
Important Information for Students with Existing OSHA-10 CardsIf you have already completed an OSHA-10 or 30 outreach training at another institution, you may not be required to retake the course. Instead, you can fill out the NTE (Non-Traditional Education Credit) form along with proof of issued card to receive credit. Please contact the department for assistance.
Time of Day
Night
Class Materials
Late Start
On

FMM 101B - 25498 - Introduction to Workplace Safety

Member for

2 years 4 months
Course Name
Introduction to Workplace Safety
Course Description (Default)
This course provides an overview of 29 CFR 1910 and 1926 as applied to the Manufacturing and Facilities Maintenance field. This course places emphasis on OSHA regulations and policies. Graded Pass/Fail.
Enrollment Status
Open
Units
1.00
Course Description (No Prerequisites)
This course provides an overview of 29 CFR 1910 and 1926 as applied to the Manufacturing and Facilities Maintenance field. This course places emphasis on OSHA regulations and policies. Graded Pass/Fail.
Catalog Number
101B
Section
5101
Class Type
Course ID
25498
Instructor
Alec Vandenbroeck
Start Date
End Date
Start Time
07:15 am
End Time
09:45 am
Enrollment Total
10
Enrollment Capacity
12
Waitlist Total
0
Semester Term
2262
Session
Four Week First Session:

The course runs 4 weeks with the beginning of the course usually occurring during the first week of the full-term.

Facility ID
WHT111
Class Days
Friday
Class Notes
Important Information for Students with Existing OSHA-10 CardsIf you have already completed an OSHA-10 or 30 outreach training at another institution, you may not be required to retake the course. Instead, you can fill out the NTE (Non-Traditional Education Credit) form along with proof of issued card to receive credit. Please contact the department for assistance.
Time of Day
Day
Class Materials
Late Start
Off

AC 212B - 25485 - Equipment Cooling

Member for

2 years 4 months
Course Name
Equipment Cooling
Course Description (Default)
An advanced course that prepares students to analyze different requirements and needs for maintaining precise temperature, humidification, filtration, and indoor air quality requirements of critical systems used in data centers; hospitals; surgical centers; and laboratories. Topics include system identification, psychrometrics, DDC controls, fans & analysis, indoor air quality, filtration and load estimating. Prerequisite: AC 110B
Enrollment Status
Open
Units
5.00
Course Description (No Prerequisites)
An advanced course that prepares students to analyze different requirements and needs for maintaining precise temperature, humidification, filtration, and indoor air quality requirements of critical systems used in data centers; hospitals; surgical centers; and laboratories. Topics include system identification, psychrometrics, DDC controls, fans & analysis, indoor air quality, filtration and load estimating.
Prerequisites
AC 110B
Catalog Number
212B
Section
5101
Class Type
Course ID
25485
Instructor
Jason Mitchell
Start Date
End Date
Start Time
07:50 pm
End Time
10:20 pm
Enrollment Total
5
Enrollment Capacity
12
Waitlist Total
0
Semester Term
2262
Session
Full Semester:

The course runs 16 weeks (also known as full-term) and begins the first week of the semester and ends the last week of the semester.

Facility ID
WHT115
Class Days
Monday
Wednesday
Time of Day
Night
Late Start
Off

AC 210B - 25484 - Boiler Operation and Maintenance

Member for

2 years 4 months
Course Name
Boiler Operation and Maintenance
Course Description (Default)
This course covers operations, safety, water treatment, control devices used with hot water boilers, low pressure boilers and power boiler systems. Prerequisite: AC 106B
Enrollment Status
Open
Units
5.00
Course Description (No Prerequisites)
This course covers operations, safety, water treatment, control devices used with hot water boilers, low pressure boilers and power boiler systems.
Prerequisites
AC 106B
Catalog Number
210B
Section
5101
Class Type
Course ID
25484
Instructor
Robert Witherell
Start Date
End Date
Start Time
05:10 pm
End Time
07:40 pm
Enrollment Total
10
Enrollment Capacity
14
Waitlist Total
0
Semester Term
2262
Session
Full Semester:

The course runs 16 weeks (also known as full-term) and begins the first week of the semester and ends the last week of the semester.

Facility ID
WHT113
Class Days
Tuesday
Thursday
Time of Day
Night
Late Start
Off