Subject Abbreviation
WELD
Subject Name
Welding

WELD 120 - 28252 - Introduction to Blacksmithing

Member for

2 years 4 months
Course Name
Introduction to Blacksmithing
Course Description (Default)
Covers basic techniques used in smithing including set up and ignition of coal and gas fired forges, base metal preparation, shaping tools and processes for bending and welding. These techniques are used to make tools like chisels, punches, and fire tongs. Students learn about design in ironwork and production techniques used in industry. Emphasis is placed on safety and best practices used in the smithing trades.
Enrollment Status
Open
Units
2.00
Course Description (No Prerequisites)
Covers basic techniques used in smithing including set up and ignition of coal and gas fired forges, base metal preparation, shaping tools and processes for bending and welding. These techniques are used to make tools like chisels, punches, and fire tongs. Students learn about design in ironwork and production techniques used in industry. Emphasis is placed on safety and best practices used in the smithing trades.
Catalog Number
120
Section
4801
Class Type
Location
Course ID
28252
Instructor
Bernhard Heer
Start Date
End Date
Start Time
09:00 am
End Time
01:00 pm
Enrollment Total
2
Enrollment Capacity
10
Waitlist Total
0
Semester Term
2272
Session
Eight Week First Session:

The course begins the first week of the full semester and ends at the half-way point of the full semester or the first 8-weeks of the full term.

Facility ID
HNA111
Class Days
Saturday
Time of Day
Day
Late Start
Off

WELD 100B - 28247 - Introduction to Welding

Member for

2 years 4 months
Course Name
Introduction to Welding
Course Description (Default)
Provides classroom and laboratory instruction in basic welding and cutting procedures with an introduction into each process using related lab exercises. Emphasis placed on proper set up and use of welding machines and the related tools used in industry. Introduces students to the importance and application of safety procedures in a welding environment. Students will set and adjust various machines, torches and tools as well as understand their functionality, limits and capabilities in a safe work environment.
Enrollment Status
Full
Units
4.00
Course Description (No Prerequisites)
Provides classroom and laboratory instruction in basic welding and cutting procedures with an introduction into each process using related lab exercises. Emphasis placed on proper set up and use of welding machines and the related tools used in industry. Introduces students to the importance and application of safety procedures in a welding environment. Students will set and adjust various machines, torches and tools as well as understand their functionality, limits and capabilities in a safe work environment.
Catalog Number
100B
Section
4003
Class Type
Location
Course ID
28247
Instructor
Pe'le' Ogloza
Start Date
End Date
Start Time
09:00 am
End Time
03:30 pm
Enrollment Total
12
Enrollment Capacity
12
Waitlist Total
2
Semester Term
2272
Session
Full Semester:

The course runs 16 weeks (also known as full-term) and begins the first week of the semester and ends the last week of the semester.

Facility ID
HNA115
Class Days
Saturday
Time of Day
Day
Late Start
Off

WELD 100B - 28245 - Introduction to Welding

Member for

2 years 4 months
Course Name
Introduction to Welding
Course Description (Default)
Provides classroom and laboratory instruction in basic welding and cutting procedures with an introduction into each process using related lab exercises. Emphasis placed on proper set up and use of welding machines and the related tools used in industry. Introduces students to the importance and application of safety procedures in a welding environment. Students will set and adjust various machines, torches and tools as well as understand their functionality, limits and capabilities in a safe work environment.
Enrollment Status
Full
Units
4.00
Course Description (No Prerequisites)
Provides classroom and laboratory instruction in basic welding and cutting procedures with an introduction into each process using related lab exercises. Emphasis placed on proper set up and use of welding machines and the related tools used in industry. Introduces students to the importance and application of safety procedures in a welding environment. Students will set and adjust various machines, torches and tools as well as understand their functionality, limits and capabilities in a safe work environment.
Catalog Number
100B
Section
4002
Class Type
Location
Course ID
28245
Instructor
Matthew Aschoff
Start Date
End Date
Start Time
11:00 am
End Time
01:50 pm
Enrollment Total
9
Enrollment Capacity
9
Waitlist Total
0
Semester Term
2272
Session
Full Semester:

The course runs 16 weeks (also known as full-term) and begins the first week of the semester and ends the last week of the semester.

Facility ID
HNA115
Class Days
Tuesday
Thursday
Time of Day
Day
Late Start
Off

WELD 100B - 28244 - Introduction to Welding

Member for

2 years 4 months
Course Name
Introduction to Welding
Course Description (Default)
Provides classroom and laboratory instruction in basic welding and cutting procedures with an introduction into each process using related lab exercises. Emphasis placed on proper set up and use of welding machines and the related tools used in industry. Introduces students to the importance and application of safety procedures in a welding environment. Students will set and adjust various machines, torches and tools as well as understand their functionality, limits and capabilities in a safe work environment.
Enrollment Status
Full
Units
4.00
Course Description (No Prerequisites)
Provides classroom and laboratory instruction in basic welding and cutting procedures with an introduction into each process using related lab exercises. Emphasis placed on proper set up and use of welding machines and the related tools used in industry. Introduces students to the importance and application of safety procedures in a welding environment. Students will set and adjust various machines, torches and tools as well as understand their functionality, limits and capabilities in a safe work environment.
Catalog Number
100B
Section
4001
Class Type
Location
Course ID
28244
Instructor
Matthew Aschoff
Start Date
End Date
Start Time
11:00 am
End Time
01:50 pm
Enrollment Total
9
Enrollment Capacity
9
Waitlist Total
1
Semester Term
2272
Session
Full Semester:

The course runs 16 weeks (also known as full-term) and begins the first week of the semester and ends the last week of the semester.

Facility ID
HNA115
Class Days
Monday
Wednesday
Time of Day
Day
Late Start
Off

WELD 218B - 28284 - Pipe Welding Procedures

Member for

2 years 4 months
Course Name
Pipe Welding Procedures
Course Description (Default)
Provides instruction on the proper techniques, skill development and proficiency of pipe welding using Shielded Metal Arc Welding (Stick) fillet and pipe groove welds on plate/pipe in all positions. Prerequisite: WELD 133B or Instructor approval.
Enrollment Status
Open
Units
4.00
Course Description (No Prerequisites)
Provides instruction on the proper techniques, skill development and proficiency of pipe welding using Shielded Metal Arc Welding (Stick) fillet and pipe groove welds on plate/pipe in all positions.
Prerequisites
WELD 133B or instructor approval
Catalog Number
218B
Section
4001
Class Type
Location
Course ID
28284
Instructor
Brandon Grajeda
Start Date
End Date
Start Time
08:00 am
End Time
02:50 pm
Enrollment Total
6
Enrollment Capacity
12
Waitlist Total
0
Semester Term
2272
Session
Full Semester:

The course runs 16 weeks (also known as full-term) and begins the first week of the semester and ends the last week of the semester.

Facility ID
HNA109A
Class Days
Saturday
Time of Day
Day
Late Start
Off

WELD 214B - 28283 - Fabrication Layout

Member for

2 years 4 months
Course Name
Fabrication Layout
Course Description (Default)
Provides instruction on basic fabrication principles, safety, measurement, layout techniques using blueprints and weld symbols and the use of common fabrication tools and associated equipment. Prerequisites: WELD 131, 132, 133 or instructor approval.
Enrollment Status
Open
Units
3.00
Course Description (No Prerequisites)
Provides instruction on basic fabrication principles, safety, measurement, layout techniques using blueprints and weld symbols and the use of common fabrication tools and associated equipment.
Prerequisites
Prerequisites: WELD 131B, 132B, 133B, or instructor approval
Catalog Number
214B
Section
4001
Class Type
Location
Course ID
28283
Instructor
Martin Windham
Start Date
End Date
Start Time
09:30 am
End Time
02:30 pm
Enrollment Total
10
Enrollment Capacity
12
Waitlist Total
0
Semester Term
2272
Session
Full Semester:

The course runs 16 weeks (also known as full-term) and begins the first week of the semester and ends the last week of the semester.

Facility ID
HNA114
Class Days
Friday
Time of Day
Day
Late Start
Off

WELD 137B - 28280 - Fcaw (Flux Core)

Member for

2 years 4 months
Course Name
Fcaw (Flux Core)
Course Description (Default)
Provides classroom and laboratory instruction in the proper techniques, skill development and proficiency of FCAW-S and FCAW-G of mild steel in various positions.
Enrollment Status
Open
Units
3.00
Course Description (No Prerequisites)
Provides classroom and laboratory instruction in the proper techniques, skill development and proficiency of FCAW-S and FCAW-G of mild steel in various positions.
Catalog Number
137B
Section
4002
Class Type
Location
Course ID
28280
Instructor
Paul Novack
Start Date
End Date
Start Time
06:00 pm
End Time
08:20 pm
Enrollment Total
9
Enrollment Capacity
12
Waitlist Total
0
Semester Term
2272
Session
Full Semester:

The course runs 16 weeks (also known as full-term) and begins the first week of the semester and ends the last week of the semester.

Facility ID
HNA111
Class Days
Tuesday
Thursday
Time of Day
Night
Late Start
Off

WELD 131B - 28257 - Blueprint Reading, Layout and Sketching

Member for

2 years 4 months
Course Name
Blueprint Reading, Layout and Sketching
Course Description (Default)
Provides instruction in the interpretation, reading and understanding of blueprints, drawings, weld symbols, fabrication layout and free hand sketching commonly used in the welding trade. Prerequisite: MATH 104B or above
Enrollment Status
Open
Units
3.00
Course Description (No Prerequisites)
Provides instruction in the interpretation, reading and understanding of blueprints, drawings, weld symbols, fabrication layout and free hand sketching commonly used in the welding trade.
Prerequisites
PR: MATH 104 or above
Catalog Number
131B
Section
4002
Class Type
Location
Course ID
28257
Instructor
Richard Samanich
Start Date
End Date
Start Time
04:00 pm
End Time
05:30 pm
Enrollment Total
6
Enrollment Capacity
15
Waitlist Total
0
Semester Term
2272
Session
Full Semester:

The course runs 16 weeks (also known as full-term) and begins the first week of the semester and ends the last week of the semester.

Facility ID
HNA114
Class Days
Tuesday
Thursday
Time of Day
Day
Late Start
Off

WELD 131B - 28255 - Blueprint Reading, Layout and Sketching

Member for

2 years 4 months
Course Name
Blueprint Reading, Layout and Sketching
Course Description (Default)
Provides instruction in the interpretation, reading and understanding of blueprints, drawings, weld symbols, fabrication layout and free hand sketching commonly used in the welding trade. Prerequisite: MATH 104B or above
Enrollment Status
Open
Units
3.00
Course Description (No Prerequisites)
Provides instruction in the interpretation, reading and understanding of blueprints, drawings, weld symbols, fabrication layout and free hand sketching commonly used in the welding trade.
Prerequisites
PR: MATH 104 or above
Catalog Number
131B
Section
4001
Class Type
Location
Course ID
28255
Instructor
Torie Winton
Start Date
End Date
Start Time
01:00 pm
End Time
03:50 pm
Enrollment Total
5
Enrollment Capacity
15
Waitlist Total
0
Semester Term
2272
Session
Full Semester:

The course runs 16 weeks (also known as full-term) and begins the first week of the semester and ends the last week of the semester.

Facility ID
HNA114
Class Days
Saturday
Time of Day
Day
Late Start
Off

WELD 240B - 28286 - Advanced GTAW

Member for

2 years 4 months
Course Name
Advanced GTAW
Course Description (Default)
Provides classroom and laboratory instruction on the proper techniques, skill development, and proficiency of Advanced Gas Tungsten Arc Welding of mild steel, stainless steel, and aluminum in various positions. WELD 134B with a grade of C- or higher or Instructor approval.
Enrollment Status
Open
Units
4.00
Course Description (No Prerequisites)
Provides classroom and laboratory instruction on the proper techniques, skill development, and proficiency of Advanced Gas Tungsten Arc Welding of mild steel, stainless steel, and aluminum in various positions. WELD 134B with a grade of C- or higher or Instructor approval.
Prerequisites
WELD 134B with a grade of C- or higher or Instructor approval.
Catalog Number
240B
Section
4001
Class Type
Location
Course ID
28286
Instructor
Richard Samanich
Start Date
End Date
Start Time
06:00 pm
End Time
09:30 pm
Enrollment Total
10
Enrollment Capacity
12
Waitlist Total
0
Semester Term
2272
Session
Full Semester:

The course runs 16 weeks (also known as full-term) and begins the first week of the semester and ends the last week of the semester.

Facility ID
HNA116
Class Days
Tuesday
Thursday
Time of Day
Night
Late Start
Off